The drone has had it's crashes yes. Visibly carbon fiber is okay but there's flex especially on the arm connected to motor 4. Used CA glue to hopefully stiffen the carbon fiber for now

@planch98 Thank you so much! I have solved the problem.

@relevinsky , i don't have a good example to point you to.. you would need to modify the code on the web GUI side and the code that is running on voxl-portal Voxl. VOXL sends all the information to the browser via web sockets. Here is where video stats (including fps) are sent : https://gitlab.com/voxl-public/voxl-sdk/services/voxl-portal/-/blob/master/src/video_group_manager.cpp?ref_type=heads#L313 and there is the browser code that parses the video stats https://gitlab.com/voxl-public/voxl-sdk/services/voxl-portal/-/blob/master/web_root/video.html#L588. I would suggest first experimenting with existing data structure, such as VideoStats and see if you change the data on the VOXL side, make sure it shows up correctly in voxl-portal. After that, you could change the VideoStats structure add a message to it and also print it in the browser. After understanding how the message passing works, you could add your own message definition on both sides and display the contents. I hope this helps. Alex

@Amber-Elaine-Parker I think our Seeker was doing something similar but it is a little bit difficult to identify because of the viewing angle of the video. I can't find our original video but our Seeker was oscillating around X-axis (FRD reference frame) like this: [image: 1703062838285-f8e87bf6-de8a-49c8-9e6c-013bc6cba5f7-image.png]

@Alex-Kushleyev @Eric-Katzfey Thank you for clearing this up. I am trying to install SDK 1.1.2 but my host machine can't discover the VOXL2 as a fastboot device (I have made an issue here). I would appreciate if you have any recommendations to hop on there as it is an urgent issue.

@tom Thanks for the reply. I thought the same at the start. I also tried connecting with the ethernet cable, and the results were the same. Do you mind if any other issues can cause the same behaviour?

@Gary-Holmgren Hi Gary, Flight Core simply has more I/O. So, if you need more I/O, like CAN, then Flight Core is a better option. VOXL 2 I/O just adds in PWM and S.Bus, so it is very limited

@Taylor-Presley Please upgrade to the latest SDK, it should be resolved

Hi, I had the same problem. You can try to transfer to the normal operation (& ADB) by: fastboot continue and disconnect-connect the USB cable in order to enable the USB change to ADB. Erez

@Jetson-Nano I believe the voxl-configure-docker-support.sh was renamed to voxl-configure-docker-support without the .sh extension.

@LucaVertiq Looking at your voxl-camera-server.conf file, it looks like the configurations are flipped in which tracking should be on camera_id: 0 and hires should be on camera_id: 1. Deleting the camera drivers in /usr/lib/camera and reconfiguring should fix that issue in your voxl-camera-server.conf file rm com.qti.sensormodule.imx214_3.bin rm com.qti.sensormodule.ov7251_2.bin voxl-configure-cameras 04

The 2nd log =============================================================================== dmesg -wH [Dec12 15:44] Linux version 5.15.133.1-microsoft-standard-WSL2 (root@1c602f52c2e4) (gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37) #1 SMP Thu Oct 5 21:02:42 UTC 2023 Command line: initrd=\initrd.img WSL_ROOT_INIT=1 panic=-1 nr_cpus=8 bonding.max_bonds=0 dummy.numdummies=0 fb_tunnels=none swiotlb=force console=hvc0 debug pty.legacy_count=0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable BIOS-e820: [mem 0x00000000000e0000-0x00000000000e0fff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000001fffff] ACPI data BIOS-e820: [mem 0x0000000000200000-0x00000000f7ffffff] usable BIOS-e820: [mem 0x0000000100000000-0x00000002047fffff] usable NX (Execute Disable) protection: active DMI not present or invalid. Hypervisor detected: Microsoft Hyper-V Hyper-V: privilege flags low 0x2e7f, high 0x3b8030, hints 0x22c2c, misc 0x24bed7b6 Hyper-V Host Build:19041-10.0-3-0.3758 Hyper-V: Nested features: 0x0 Hyper-V: LAPIC Timer Frequency: 0x1e8480 Hyper-V: Using hypercall for remote TLB flush clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns tsc: Marking TSC unstable due to running on Hyper-V tsc: Detected 2711.999 MHz processor e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x204800 max_arch_pfn = 0x400000000 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT last_pfn = 0xf8000 max_arch_pfn = 0x400000000 Using GB pages for direct mapping RAMDISK: [mem 0x03de5000-0x03fe6fff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000E0000 000024 (v02 VRTUAL) ACPI: XSDT 0x0000000000100000 000044 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) ACPI: FACP 0x0000000000101000 000114 (v06 VRTUAL MICROSFT 00000001 MSFT 00000001) ACPI: DSDT 0x00000000001011B8 01E184 (v02 MSFTVM DSDT01 00000001 MSFT 05000000) ACPI: FACS 0x0000000000101114 000040 ACPI: OEM0 0x0000000000101154 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) ACPI: SRAT 0x000000000011F33C 000290 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) ACPI: APIC 0x000000000011F5CC 000088 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001) ACPI: Reserving FACP table memory at [mem 0x101000-0x101113] ACPI: Reserving DSDT table memory at [mem 0x1011b8-0x11f33b] ACPI: Reserving FACS table memory at [mem 0x101114-0x101153] ACPI: Reserving OEM0 table memory at [mem 0x101154-0x1011b7] ACPI: Reserving SRAT table memory at [mem 0x11f33c-0x11f5cb] ACPI: Reserving APIC table memory at [mem 0x11f5cc-0x11f653] Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000002047fffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009ffff] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] node 0: [mem 0x0000000100000000-0x00000002047fffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000002047fffff] On node 0, zone DMA: 1 pages in unavailable ranges On node 0, zone DMA: 352 pages in unavailable ranges On node 0, zone Normal: 14336 pages in unavailable ranges ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: Using ACPI (MADT) for SMP configuration information smpboot: Allowing 8 CPUs, 0 hotplug CPUs [mem 0xf8000000-0xffffffff] available for PCI devices Booting paravirtualized kernel on Hyper-V clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 percpu: Embedded 53 pages/cpu s177624 r8192 d31272 u262144 pcpu-alloc: s177624 r8192 d31272 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Hyper-V: PV spinlocks enabled PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) Built 1 zonelists, mobility grouping on. Total pages: 2049253 Kernel command line: initrd=\initrd.img WSL_ROOT_INIT=1 panic=-1 nr_cpus=8 bonding.max_bonds=0 dummy.numdummies=0 fb_tunnels=none swiotlb=force console=hvc0 debug pty.legacy_count=0 Unknown kernel command line parameters "WSL_ROOT_INIT=1", will be passed to user space. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 4091636K/8329852K available (18452K kernel code, 2632K rwdata, 9736K rodata, 2008K init, 1780K bss, 257164K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Kernel/User page tables isolation: enabled ftrace: allocating 53235 entries in 208 pages ftrace: allocated 208 pages with 3 groups rcu: Hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 Using NULL legacy PIC NR_IRQS: 16640, nr_irqs: 488, preallocated irqs: 0 random: crng init done Console: colour dummy device 80x25 ACPI: Core revision 20210730 Failed to register legacy timer interrupt APIC: Switch to symmetric I/O mode setup Hyper-V: Using IPI hypercalls Hyper-V: Using enlightened APIC (xapic mode) Calibrating delay loop (skipped), value calculated using timer frequency.. 5423.99 BogoMIPS (lpj=27119990) Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Mitigation: IBRS Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT RETBleed: Mitigation: IBRS Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp MDS: Vulnerable: Clear CPU buffers attempted, no microcode TAA: Vulnerable: Clear CPU buffers attempted, no microcode MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode SRBDS: Unknown: Dependent on hypervisor status GDS: Unknown: Dependent on hypervisor status x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. Freeing SMP alternatives memory: 60K pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing landlock: Up and running. Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) smpboot: CPU0: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3) Performance Events: Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f signal: max sigframe size: 1776 rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. #2 #3 #4 #5 #6 #7 smp: Brought up 1 node, 8 CPUs smpboot: Max logical packages: 1 smpboot: Total of 8 processors activated (43391.98 BogoMIPS) node 0 deferred pages initialised in 10ms devtmpfs: initialized x86/mm: Memory block size: 128MB clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 2048 (order: 5, 131072 bytes, linear) NET: Registered PF_NETLINK/PF_ROUTE protocol family audit: initializing netlink subsys (disabled) audit: type=2000 audit(1702388656.020:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'step_wise' cpuidle: using governor menu ACPI: bus type PCI registered PCI: Fatal: No config space access function found kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages raid6: skip pq benchmark and using algorithm avx2x4 raid6: using avx2x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: PM: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Enabled 2 GPEs in block 00 to 0F iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: lazy mode SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it PTP clock support registered hv_vmbus: Vmbus version:5.2 PCI: Using ACPI for IRQ routing PCI: System does not support PCI clocksource: Switched to clocksource hyperv_clocksource_tsc_page hv_vmbus: Unknown GUID: c376c1c3-d276-48d2-90a9-c04748072c60 VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) FS-Cache: Loaded pnp: PnP ACPI init pnp: PnP ACPI: found 1 devices NET: Registered PF_INET protocol family IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) TCP: Hash tables configured (established 65536 bind 65536) UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB) Trying to unpack rootfs image as initramfs... kvm: no hardware support has_svm: not amd or hygon kvm: no hardware support Freeing initrd memory: 2056K Initialise system trusted keyrings workingset: timestamp_bits=46 max_order=21 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Key type cifs.idmap registered fuse: init (API version 7.34) SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled 9p: Installing v9fs 9p2000 file system support FS-Cache: Netfs '9p' registered for caching FS-Cache: Netfs 'ceph' registered for caching ceph: loaded (mds proto 32) NET: Registered PF_ALG protocol family xor: automatically using best checksumming function avx Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) hv_vmbus: Unknown GUID: 6e382d18-3336-4f4b-acc4-2b7703d4df4a hv_vmbus: Unknown GUID: dde9cbc0-5060-4436-9448-ea1254a5d177 hv_vmbus: registering driver hv_pci hv_pci 6582070a-79e6-4e48-a67a-69bbf4a6d6e1: PCI VMBus probing: Using version 0x10003 hv_pci 6582070a-79e6-4e48-a67a-69bbf4a6d6e1: PCI host bridge to bus 79e6:00 pci_bus 79e6:00: root bus resource [mem 0xc00000000-0xc00002fff window] pci_bus 79e6:00: No busn resource found for root bus, will use [bus 00-ff] pci 79e6:00:00.0: [1af4:1043] type 00 class 0x010000 pci 79e6:00:00.0: reg 0x10: [mem 0xc00000000-0xc00000fff 64bit] pci 79e6:00:00.0: reg 0x18: [mem 0xc00001000-0xc00001fff 64bit] pci 79e6:00:00.0: reg 0x20: [mem 0xc00002000-0xc00002fff 64bit] pci_bus 79e6:00: busn_res: [bus 00-ff] end is updated to 00 pci 79e6:00:00.0: BAR 0: assigned [mem 0xc00000000-0xc00000fff 64bit] pci 79e6:00:00.0: BAR 2: assigned [mem 0xc00001000-0xc00001fff 64bit] pci 79e6:00:00.0: BAR 4: assigned [mem 0xc00002000-0xc00002fff 64bit] hv_pci 94295b9e-2e3e-4d7d-81d0-af5f0f243bfe: PCI VMBus probing: Using version 0x10003 hv_pci 94295b9e-2e3e-4d7d-81d0-af5f0f243bfe: PCI host bridge to bus 2e3e:00 pci_bus 2e3e:00: No busn resource found for root bus, will use [bus 00-ff] pci 2e3e:00:00.0: [1414:008e] type 00 class 0x030200 pci_bus 2e3e:00: busn_res: [bus 00-ff] end is updated to 00 ACPI: AC: AC Adapter [AC1] (on-line) ACPI: battery: Slot [BAT1] (battery present) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Non-volatile memory driver v1.3 [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 printk: console [hvc0] enabled hv_pci b0d85b1e-db44-4e9b-8d9d-4a4e4959e761: PCI VMBus probing: Using version 0x10003 brd: module loaded hv_pci b0d85b1e-db44-4e9b-8d9d-4a4e4959e761: PCI host bridge to bus db44:00 pci_bus db44:00: root bus resource [mem 0xc00004000-0xc00006fff window] loop: module loaded pci_bus db44:00: No busn resource found for root bus, will use [bus 00-ff] hv_vmbus: registering driver hv_storvsc wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. pci db44:00:00.0: [1af4:1049] type 00 class 0x010000 tun: Universal TUN/TAP device driver, 1.6 scsi host0: storvsc_host_t PPP generic driver version 2.4.2 PPP BSD Compression module registered pci db44:00:00.0: reg 0x10: [mem 0xc00004000-0xc00004fff 64bit] PPP Deflate Compression module registered PPP MPPE Compression module registered pci db44:00:00.0: reg 0x18: [mem 0xc00005000-0xc00005fff 64bit] NET: Registered PF_PPPOX protocol family usbcore: registered new interface driver cdc_ether pci db44:00:00.0: reg 0x20: [mem 0xc00006000-0xc00006fff 64bit] usbcore: registered new interface driver cdc_ncm usbcore: registered new interface driver r8153_ecm hv_vmbus: registering driver hv_netvsc VFIO - User Level meta-driver version: 0.3 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver ch341 usbserial: USB Serial support registered for ch341-uart usbcore: registered new interface driver cp210x usbserial: USB Serial support registered for cp210x usbcore: registered new interface driver ftdi_sio pci_bus db44:00: busn_res: [bus 00-ff] end is updated to 00 usbserial: USB Serial support registered for FTDI USB Serial Device pci db44:00:00.0: BAR 0: assigned [mem 0xc00004000-0xc00004fff 64bit] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller pci db44:00:00.0: BAR 2: assigned [mem 0xc00005000-0xc00005fff 64bit] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1 pci db44:00:00.0: BAR 4: assigned [mem 0xc00006000-0xc00006fff 64bit] vhci_hcd: created sysfs vhci_hcd.0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: USB/IP Virtual Host Controller usb usb1: Manufacturer: Linux 5.15.133.1-microsoft-standard-WSL2 vhci_hcd usb usb1: SerialNumber: vhci_hcd.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: USB/IP Virtual Host Controller usb usb2: Manufacturer: Linux 5.15.133.1-microsoft-standard-WSL2 vhci_hcd usb usb2: SerialNumber: vhci_hcd.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected hv_vmbus: registering driver hyperv_keyboard rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: registered as rtc0 rtc_cmos 00:00: setting system clock to 2023-12-12T13:44:16 UTC (1702388656) rtc_cmos 00:00: alarms up to one month, 114 bytes nvram device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com device-mapper: raid: Loading target version 1.15.1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils hv_vmbus: registering driver hv_balloon hv_utils: TimeSync IC version 4.0 hv_vmbus: registering driver dxgkrnl hv_balloon: Using Dynamic Memory protocol version 2.0 drop_monitor: Initializing network drop monitor service Mirror/redirect action on Free page reporting enabled hv_balloon: Cold memory discard hint enabled with order 9 u32 classifier Performance counters on input device check on Actions configured IPVS: Registered protocols (TCP, UDP) IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: ipvs loaded. IPVS: [rr] scheduler registered. IPVS: [wrr] scheduler registered. IPVS: [sh] scheduler registered. ipip: IPv4 and MPLS over IPv4 tunneling driver ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully Initializing XFRM netlink socket NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered PF_PACKET protocol family Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 sctp: Hash tables configured (bind 256/256) 9pnet: Installing 9P2000 support Key type dns_resolver registered Key type ceph registered libceph: loaded (mon/osd proto 15/24) NET: Registered PF_VSOCK protocol family hv_vmbus: registering driver hv_sock IPI shorthand broadcast: enabled sched_clock: Marking stable (582788500, 261300)->(605012700, -21962900) registered taskstats version 1 Loading compiled-in X.509 certificates Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no Freeing unused kernel image (initmem) memory: 2008K Write protecting the kernel read-only data: 30720k Freeing unused kernel image (text/rodata gap) memory: 2024K Freeing unused kernel image (rodata/data gap) memory: 504K Run /init as init process with arguments: /init with environment: HOME=/ TERM=linux WSL_ROOT_INIT=1 scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 798352 512-byte logical blocks: (409 MB/390 MiB) sd 0:0:0:0: [sda] Write Protect is on sd 0:0:0:0: [sda] Mode Sense: 0f 00 80 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Attached SCSI disk scsi 0:0:0:1: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 EXT4-fs (sda): mounted filesystem without journal. Opts: (null). Quota mode: none. sd 0:0:0:1: Attached scsi generic sg1 type 0 sd 0:0:0:1: [sdb] 4194312 512-byte logical blocks: (2.15 GB/2.00 GiB) sd 0:0:0:1: [sdb] 4096-byte physical blocks sd 0:0:0:1: [sdb] Write Protect is off sd 0:0:0:1: [sdb] Mode Sense: 0f 00 00 00 sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:1: [sdb] Attached SCSI disk Adding 2097152k swap on /dev/sdb. Priority:-2 extents:1 across:2097152k IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready FS-Cache: Duplicate cookie detected FS-Cache: O-cookie c=00000004 [p=00000002 fl=222 nc=0 na=1] FS-Cache: O-cookie d=00000000c362bb02{9P.session} n=00000000db604fe4 FS-Cache: O-key=[10] '34323934393337333935' FS-Cache: N-cookie c=00000005 [p=00000002 fl=2 nc=0 na=1] FS-Cache: N-cookie d=00000000c362bb02{9P.session} n=000000000df85e53 FS-Cache: N-key=[10] '34323934393337333935' scsi 0:0:0:2: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 sd 0:0:0:2: Attached scsi generic sg2 type 0 sd 0:0:0:2: [sdc] 2147483648 512-byte logical blocks: (1.10 TB/1.00 TiB) sd 0:0:0:2: [sdc] 4096-byte physical blocks sd 0:0:0:2: [sdc] Write Protect is off sd 0:0:0:2: [sdc] Mode Sense: 0f 00 00 00 sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:2: [sdc] Attached SCSI disk EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none. hv_pci 21687cee-d7cf-45b0-8c58-44122ea8b848: PCI VMBus probing: Using version 0x10003 hv_pci 21687cee-d7cf-45b0-8c58-44122ea8b848: PCI host bridge to bus d7cf:00 pci_bus d7cf:00: root bus resource [mem 0xc00008000-0xc0000afff window] pci_bus d7cf:00: No busn resource found for root bus, will use [bus 00-ff] pci d7cf:00:00.0: [1af4:1049] type 00 class 0x010000 pci d7cf:00:00.0: reg 0x10: [mem 0xc00008000-0xc00008fff 64bit] pci d7cf:00:00.0: reg 0x18: [mem 0xc00009000-0xc00009fff 64bit] pci d7cf:00:00.0: reg 0x20: [mem 0xc0000a000-0xc0000afff 64bit] pci_bus d7cf:00: busn_res: [bus 00-ff] end is updated to 00 pci d7cf:00:00.0: BAR 0: assigned [mem 0xc00008000-0xc00008fff 64bit] pci d7cf:00:00.0: BAR 2: assigned [mem 0xc00009000-0xc00009fff 64bit] pci d7cf:00:00.0: BAR 4: assigned [mem 0xc0000a000-0xc0000afff 64bit] docker: unrecognized service systemd-journald[69]: Received request to flush runtime journal from PID 1 systemd-journald[69]: File /var/log/journal/0a255a89c7be40df930d7de3a9c61b10/system.journal corrupted or uncleanly shut down, renaming and replacing. WSL (2): Creating login session for root WSL (2) ERROR: ConfigHandleInteropMessage:595: getenv(XDG_RUNTIME_DIR) failed 0 WSL (2): Creating login session for user WSL (2) ERROR: ConfigHandleInteropMessage:595: getenv(XDG_RUNTIME_DIR) failed 0 vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(3) vhci_hcd vhci_hcd.0: devid(65537) speed(3) speed_str(high-speed) vhci_hcd vhci_hcd.0: Device attached usb 1-1: new high-speed USB device number 2 using vhci_hcd usb 1-1: SetAddress Request (2) to port 0 usb 1-1: New USB device found, idVendor=05c6, idProduct=9008, bcdDevice= 0.00 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: QUSB_BULK_CID:0412_SN:6F5CF77A usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM vhci_hcd: unlink->seqnum 10 vhci_hcd: the urb (seqnum 10) was already given back hv_balloon: Max. dynamic memory size: 8136 MB vhci_hcd: unlink->seqnum 12 vhci_hcd: the urb (seqnum 12) was already given back vhci_hcd: unlink->seqnum 14 vhci_hcd: the urb (seqnum 14) was already given back vhci_hcd: connection closed vhci_hcd: stop threads vhci_hcd: release socket vhci_hcd: disconnect device usb 1-1: USB disconnect, device number 2 vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(3) vhci_hcd vhci_hcd.0: devid(65537) speed(3) speed_str(high-speed) vhci_hcd vhci_hcd.0: Device attached usb 1-1: new high-speed USB device number 3 using vhci_hcd usb 1-1: SetAddress Request (3) to port 0 usb 1-1: New USB device found, idVendor=05c6, idProduct=9008, bcdDevice= 0.00 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: QUSB_BULK_CID:0412_SN:6F5CF77A usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM vhci_hcd: unlink->seqnum 1741 vhci_hcd: the urb (seqnum 1741) was already given back vhci_hcd: unlink->seqnum 1743 vhci_hcd: the urb (seqnum 1743) was already given back ... vhci_hcd: the urb (seqnum 2113) was already given back vhci_hcd: unlink->seqnum 2115 vhci_hcd: the urb (seqnum 2115) was already given back vhci_hcd: connection closed vhci_hcd: stop threads vhci_hcd: release socket vhci_hcd: disconnect device usb 1-1: USB disconnect, device number 3 WSL (7426) ERROR: InitCreateProcessUtilityVm:1705: write failed 32 WSL (15838) ERROR: InitCreateProcessUtilityVm:1705: write failed 32

@Moderator Thanks for the information. Thats exaclty What I want. I need a developer platform. I am a student . I need to do three things on it. Autonomous Indoor Control at any given points to sent it to any location ( Can i do it with Python Custom Control) Video on PC or Laptop Access or Python to apply Image processing and Machine Leanring Algortihms on it? Can I able to fly 3 4 or more drones with Ad Hoc Nework support ? Does it support mutiple UAVs flying togehter? These things are main please help me

@martongonczy Was it an RB5 or a voxl2?