Hardware people on my team asked me to send it to send it to them at a different facility after posting this. My apologies @Alex-Gardner Will follow up if I see this happening with another board Marking as DEAD

@Chad-Sweet Any other datasheets aside from this one? This is very high level. I am looking for pinouts, electrical characteristics, etc. Some specific part number. A technical reference manual?

@Viswanathan-R Our Microhard add-on boards are purely Microhard -> ethernet adapters, that may be more of a question for Microhard themselves. The antennas that we ship with support multiple frequencies so if you have a specific frequency you are using you may get better performance with antennas that tailored to that specific frequency.

@Chad-Sweet Yes, it usually is a good starting point. I do want to mention it took us 3 or 4 separate resets of all related radio settings before this particular glitch went away.

@jskard Would it be possible for you to please open up new forum posts for these new questions so that they can be better tracked? Thanks!

Hi ModalTB, I was able to resolve the issue looking deeper into QGroundControl. I had set the system to HITL after following your awesome tutorial: https://www.youtube.com/watch?v=-uoIxAkiYtk To fix this, I switched the system back to "Generic Quadcopter" in order to receive battery data. Thank you for your through response. It helped me to resolve this. Best Regards, Justin

@RichieRich said in Which controller are you using in the LTE demo video?: https://www.razer.com/mobile-controllers/razer-raiju-mobile/RZ06-02800100-R3U1 Thanks!

hi @Chad-Sweet will this work with M0025 as well? i.e removing lens and attaching some external lens

Yes, BLHeli ESCs are supported with VOXL Flight and Flight Core. See documentation here: https://docs.modalai.com/voxl-flight-datasheet-connectors/#j1007---8-channel-pwm--4-channel-dshot-esc-output-connector The ModalAI ESC has a number of advantages for tightly integrated products: Digital / UART communication Closed loop RPM control produces generally more efficient systems Feedback control to detect obstruction or motor failure. Built in USA We will bring this back in stock once we can source the appropriate MCU. The chip shortage is especially relevant to motor controllers

@tom The crazy continues. The ATT sim card works at my home, though not in the office. I have an ATT phone, and it works at the office, though the data sim card does not. arrgh.

Thanks, I missed that going through the documentation. We would prefer to use the direct add on but what we already purchased is https://www.airborneinnovations.com/ai/products/picoradio/ We also need to incorporate FIPS 140.2 validated radios. Currently microhard does not have FIPS 140.2 Validated radios and Doodle labs in in process. Doodle labs is borderline for us on throughput for our application. So we need to see about integrating different radios which could require a adaptor cable.

The M0026 IMX377 has an M12 mount lens. There are hundreds of compatible lenses out there for that module.

@m4v3r said in Turn off ESC Beep: e Oh that's great news! Thanks a bunch, I'll have to try this out

No worries, thanks

@vmassague Awesome!

@Chuck-Bokath Are you using an LTE v1 or v2 modem? Are you using voxl-modem in order to connect to the network?

Hi Adarsh, Software version 34 is the latest, so you should be OK. It looks like you are using some old software tools. Can you please get a clean check out of voxl-esc (master) repo and follow instructions to obtain voxl-esc-tools-bin : https://gitlab.com/voxl-public/flight-core-px4/voxl-esc/-/tree/master/tools (see readme). You probably have some old code from when we released it from Qualcomm and the parameter struct has changed since then. Alex

@Daniel-Ryu Great!