I am experiencing an issue with the image returned by both the IMX377 and IMX214 sensor returned as a green, static screen.

At the roll of a dice, sometimes the image returned when streaming over either ROS or VOXL-RTSP protocols will return a corrupted image. This image appears as a static screen of green, entirely corrupted, like that of static noise loop of a CRT television.

This is fixed by only hard-reset of the VOXL.

Are y'all familiar with this issue? Even when on the bench, it seems to happen randomly, but even as random as it was, a hard-reset will for no good reason resolve this issue. Could this be a filtering or a hardware issue?

@Chad-Sweet Thanks for the link, its nice to see such a large available selection.

Concerning the M0026 and M0024 I have, it seems that there is a black loctite on the threads, and I may need to sand it down to unscrew them. Would it be possible to order these in the future but without loctite applied?

Also, for the M0024, does any 9mm lens attachment work? I couldn't find any reference on the shop page like the M12 for the M0026.

Cheers

I would like to like to purchase different camera lens and then swap them out on the camera modules from ModalAI. This would allow us to play with different FOVs to see which fits our application the best.

For example, I have the M0024 and M0026, which comes with screws to fasten lens. However, they are also glued. If I want to swap out lens, would my best approach be to request these models without the glue?

Best Regards