Docker daemon fails to start on voxl
-
@kiprock Hi I have a exactly same issue.
I flashed image and reset factory configuration on my VOXL, but, It has still issue.
Did you resolve this problem?
Thanks,
-
@Eric-Katzfey if you cannot start docker images, you can try the command above to clear them. Good luck.
-
Thanks, but I think you meant to ping @shlee853
-
@kiprock thank you for your reply
I’ll try it -
Great!
I resolved this problem as you mentioned.
yocto:/$ rm /data/network/files/local-kv.db yocto:/$ voxl-configure-docker-support.sh Stopping original docker service Enabling our own services docker-start & docker-prepare starting docker-start.service loading hello-world docker image successfully loaded hello-world starting docker-prepare service Created symlink from /etc/systemd/system/default.target.wants/docker-autorun.service to /etc/systemd/system/docker-autorun.service. done configuring voxl-docker-support -
@kiprock Thank you for this, that also solved the issue in my case.
To be a little more cautious, I simply renamed the existing file, which forced the generation of a new one when running the configuration script
voxl-configure-docker-support.sh:voxl:/data/network/files$ mv local-kv.db local-kv_DISABLED.db -
@modaltb I have a problem, after I write that line, the drone display a message that says: voxl:/$ voxl-configure-docker-suport.sh
bash: voxl-configure-docker-suport.sh: command not found
voxl:/$ -
@José-Quintanilla Looks like you spelled it wrong
-
@José-Quintanilla You can use [TAB] after you start writing a command to auto-fill
-
@tom I think it worked, thanks
-
@tom It wasn't that, because I need that especific line on my VOXL to work, so I can use properly the sdk
-
@José-Quintanilla What is not working? Did you run
voxl-configure-docker-support.sh? -
@tom That's the line that doesnt let me run, my done say: voxl-configure-docker-support.sh: command not found
-
@José-Quintanilla What release do you have installed, what does
voxl-versionsay? -
@tom If I recall is the 0.9 version
-
@José-Quintanilla When you get a chance post the output of
voxl-version. Also what hardware are you on? -
@tom I confirm that is the voxl 0.9 version on a m500 hardware im using a voxl flight
-
@José-Quintanilla I was asking because that command also lists installed packages, try without the .sh:
voxl-configure-docker-support -
@tom voxl:/$ voxl-version
system-image: 4.0.0
kernel: #1 SMP PREEMPT Thu Oct 13 17:57:05 UTC 2022 3.18.71-perfhw version: VOXL
voxl-suite: 0.9.4
Packages:
Repo: http://voxl-packages.modalai.com/dists/apq8096/sdk-0.9/binary-arm64/
Last Updated: stat: cannot stat '/var/lib/opkg/lists/modalai': No such file or directory
stat: cannot stat '/var/lib/opkg/lists/modalai': No such file or directory
WARNING: repo file has changed since last update,
packages may have originated from a different repo
List:
apq8096-dfs-server 0.3.1
apq8096-imu-server 1.0.3
apq8096-libpng 1.6.38-1
apq8096-system-tweaks 0.1.3
apq8096-tflite 2.8.3-1
libapq8096-io 0.6.0
libmodal-cv 0.2.3
libmodal-exposure 0.0.7
libmodal-journal 0.2.1
libmodal-json 0.4.3
libmodal-pipe 2.6.0
libvoxl-cci-direct 0.1.5
libvoxl-cutils 0.1.1
voxl-camera-calibration 0.2.3
voxl-camera-server 1.3.5
voxl-cpu-monitor 0.3.0
voxl-docker-support 1.2.4
voxl-gphoto2-server 0.0.10
voxl-jpeg-turbo 2.1.3-4
voxl-libgphoto2 0.0.4
voxl-libuvc 1.0.7
voxl-logger 0.3.4
voxl-mavlink 0.1.0
voxl-mavlink-server 0.2.0
voxl-modem 0.16.1
voxl-mongoose 7.7.0-1
voxl-mpa-to-ros 0.3.6
voxl-mpa-tools 0.7.6
voxl-opencv 4.5.5-1
voxl-portal 0.4.2
voxl-qvio-server 0.8.2
voxl-streamer 0.4.1
voxl-suite 0.9.4
voxl-system-image 4.0-r0
voxl-tag-detector 0.0.4
voxl-tflite-server 0.3.1
voxl-utils 1.2.2
voxl-uvc-server 0.1.3
voxl-vision-px4 1.4.0
voxl-vpn 0.0.6voxl:/$
-
@tom I think I need to use the command with the .sh, I'm following this guide https://gitlab.com/voxl-public/voxl-docker-images/voxl-docker-mavsdk-python
and the command you want me to do is referring to this guide: https://docs.modalai.com/docker-on-voxl/
