Docker daemon fails to start on voxl
-
@kiprock Everything is stored on /data. But again, I would reflash and start over just to verify Docker operation.
-
@Chad-Sweet Thanks for the fast response!
yocto:~# voxl-configure-docker-support.sh Stopping original docker service Enabling our own services docker-start & docker-prepare starting docker-start.service loading hello-world docker image Cannot connect to the Docker daemon. Is the docker daemon running on this host? yocto:~# systemctl status docker ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; disabled; vendor preset: enabled) Active: inactive (dead) Docs: http://docs.docker.com May 13 15:46:33 apq8096 systemd[1]: Stopped Docker Application Container Engine. yocto:~# yocto:~# systemctl status docker ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; disabled; vendor preset: enabled) Active: inactive (dead) Docs: http://docs.docker.com May 13 15:46:33 apq8096 systemd[1]: Stopped Docker Application Container Engine. yocto:~# systemctl start docker yocto:~# systemctl status docker ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; disabled; vendor preset: enabled) Active: failed (Result: exit-code) since Thu 2021-05-13 15:48:03 UTC; 2s ago Docs: http://docs.docker.com Process: 3678 ExecStart=/usr/bin/docker daemon -H fd:// --raw-logs (code=exited, status=2) Main PID: 3678 (code=exited, status=2) May 13 15:48:03 apq8096 systemd[1]: Started Docker Application Container Engine. May 13 15:48:03 apq8096 docker[3678]: flag provided but not defined: --raw-logs May 13 15:48:03 apq8096 docker[3678]: See '/usr/bin/docker daemon --help'. May 13 15:48:03 apq8096 systemd[1]: docker.service: Main process exited, code=exited, status=2/INVALIDARGUMENT May 13 15:48:03 apq8096 systemd[1]: docker.service: Unit entered failed state. May 13 15:48:03 apq8096 systemd[1]: docker.service: Failed with result 'exit-code'. yocto:~# docker images An error occurred trying to connect: Get http://%2Fvar%2Frun%2Fdocker.sock/v1.21/images/json: read unix @->/var/run/docker.sock: read: connection reset by peer -
@Eric-Katzfey if you cannot start docker images, you can try the command above to clear them. Good luck.
-
@Eric-Katzfey if you cannot start docker images, you can try the command above to clear them. Good luck.
Thanks, but I think you meant to ping @shlee853
-
@Eric-Katzfey if you cannot start docker images, you can try the command above to clear them. Good luck.
-
Great!
I resolved this problem as you mentioned.
yocto:/$ rm /data/network/files/local-kv.db yocto:/$ voxl-configure-docker-support.sh Stopping original docker service Enabling our own services docker-start & docker-prepare starting docker-start.service loading hello-world docker image successfully loaded hello-world starting docker-prepare service Created symlink from /etc/systemd/system/default.target.wants/docker-autorun.service to /etc/systemd/system/docker-autorun.service. done configuring voxl-docker-support -
rm /data/network/files/local-kv.dbdid the trick. Thanks for providing that missing piece of data!
@kiprock Thank you for this, that also solved the issue in my case.
To be a little more cautious, I simply renamed the existing file, which forced the generation of a new one when running the configuration script
voxl-configure-docker-support.sh:voxl:/data/network/files$ mv local-kv.db local-kv_DISABLED.db -
What do you see after running
voxl-configure-docker.sh?Should be something like:
yocto:/# voxl-configure-docker-support.sh Stopping original docker service Enabling our own services docker-start & docker-prepare starting docker-start.service loading hello-world docker image successfully loaded hello-world starting docker-prepare service done configuring voxl-docker-support@modaltb I have a problem, after I write that line, the drone display a message that says: voxl:/$ voxl-configure-docker-suport.sh
bash: voxl-configure-docker-suport.sh: command not found
voxl:/$ -
@José-Quintanilla You can use [TAB] after you start writing a command to auto-fill
-
@José-Quintanilla You can use [TAB] after you start writing a command to auto-fill
-
@José-Quintanilla You can use [TAB] after you start writing a command to auto-fill
-
@José-Quintanilla What is not working? Did you run
voxl-configure-docker-support.sh?@tom That's the line that doesnt let me run, my done say: voxl-configure-docker-support.sh: command not found
-
@José-Quintanilla What release do you have installed, what does
voxl-versionsay? -
@José-Quintanilla When you get a chance post the output of
voxl-version. Also what hardware are you on? -
@José-Quintanilla When you get a chance post the output of
voxl-version. Also what hardware are you on?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login