M500 will not connect to QGC, but still has shh connection
-
looks like the problem was Windows. let me double check and I'll post again what happens but it is loading now...
-
@tom would you happen to know how to get the ecdsa password for my aircraft?
-
@Steve-Sager If you're referring to the SSH login:
Defaults are as follows
user: root
pass: oelinux123 -
@tom After following all the instructions and successfully flashing the new firmware onto the aircraft. I have connected to the ssh once again and set the QGC IP address to the correct laptop ip but the aircraft still isn't connecting to QGC.
-
@Steve-Sager Here's something else to look at: https://docs.qgroundcontrol.com/master/en/troubleshooting/qgc_setup.html#waiting_for_connection
-
@tom I will be looking to the firewall to make sure it wasn't that, but we have allowed the application past the wall. Could this be related to to something else?
-
it looks like the previous command you had me run:
cat /etc/modalai/voxl-vision-px4.conf | grep qgc_ip
is giving me a different ip address than the one we put into voxl-vision-px4. how do I change that one to the correct address? -
@Steve-Sager That's interesting, you can use
vito modify the file and enter the correct IP in the qgc_ip field,vi /etc/modalai/voxl-vision-px4.conf -
I would also make sure that you're able to ping your PC from your drone.
-
SUCCESS! we have established connection to the aircraft. everything is working. @tom thanks so much for all your help
The solution was to update the aircraft using a linux system instead of windows.
Then we had to to use ssh-keygen to reconnect to the aircraft, and used the new aircraft ip address.
Finally we had to manually set the qgc ip twice.
We are now back up and runningCheers!
-
@Steve-Sager Great to hear! Just to confirm you flashed the latest platform release, 0.9? Making a note of your issue. It's very unusual that you would have to manually edit the qgc_ip. Thank you for being patient.
-
@tom Yeah I am on 0.9 platform release
