M500 will not connect to QGC, but still has shh connection
-
looks like the problem was Windows. let me double check and I'll post again what happens but it is loading now...
-
@tom would you happen to know how to get the ecdsa password for my aircraft?
-
@Steve-Sager If you're referring to the SSH login:
Defaults are as follows
user: root
pass: oelinux123@tom After following all the instructions and successfully flashing the new firmware onto the aircraft. I have connected to the ssh once again and set the QGC IP address to the correct laptop ip but the aircraft still isn't connecting to QGC.
-
@Steve-Sager Here's something else to look at: https://docs.qgroundcontrol.com/master/en/troubleshooting/qgc_setup.html#waiting_for_connection
-
@Steve-Sager Here's something else to look at: https://docs.qgroundcontrol.com/master/en/troubleshooting/qgc_setup.html#waiting_for_connection
@tom I will be looking to the firewall to make sure it wasn't that, but we have allowed the application past the wall. Could this be related to to something else?
-
it looks like the previous command you had me run:
cat /etc/modalai/voxl-vision-px4.conf | grep qgc_ip
is giving me a different ip address than the one we put into voxl-vision-px4. how do I change that one to the correct address? -
SUCCESS! we have established connection to the aircraft. everything is working. @tom thanks so much for all your help
The solution was to update the aircraft using a linux system instead of windows.
Then we had to to use ssh-keygen to reconnect to the aircraft, and used the new aircraft ip address.
Finally we had to manually set the qgc ip twice.
We are now back up and runningCheers!
-
@Steve-Sager Great to hear! Just to confirm you flashed the latest platform release, 0.9? Making a note of your issue. It's very unusual that you would have to manually edit the qgc_ip. Thank you for being patient.
@tom Yeah I am on 0.9 platform release
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login