@aheyne ,

Sorry for the delay.

You can find the M0172 CAD file here

Alex

@leandro , documentation for M0187 has been updated to include the 3D CAD file :

https://docs.modalai.com/M0187/#3d-drawings

Alex

@Alex-Kushleyev This was what I got when opening the file in SolidWorks:
a3f8d672-9ddc-465e-85c5-f40e6203ce29-image.png

I found a symlink mismatch in the file tree... pushing M073 PCB board with M0172 connector.

Anyway, it is solved now:

8f13ae56-bfcd-4829-8bd1-e238097e9bb0-image.png

Thank you.

Regards,
Jacob

Hello @Myles-Levine and All,

You have been very patient.. Sorry for the delay.

The Step file for the exact configuration you requested has been uploaded to our Assets page:

https://developer.modalai.com/asset/6
da4000f6-740e-4d7c-9770-0219ba55bad1-image.png

It should look something like (well, exactly like 🙂 ) the rendering below. Please let me know if you have any issues with the model. It may take a few minutes to load..

Alex

a7a154f3-aad1-4980-b935-a2a3cfaf7e4c-image.png

Hi @Jon-Brookshire ,

Please see the following post (just updated) : https://forum.modalai.com/topic/5052/starling-2-max-cad

Alex

@ktrieu , you can find the STEP file for the M0166 camera module here : https://docs.modalai.com/pcb-catalog/

Hello @Ryan-Min,
As far as I know, there is no specific CAD model file for the GPS mast. You should use the complete CAD model of the Starling 2 Max drone, which is available for download in the developer download section. You will need to create an account.
Here is a direct link to the most recent version of the model, the version V3 : D0012-4-V3-C28-M36-T7-K0-Starling2-Max-V3-20260317.step
The latest changes to the model are intended to improve GNSS performance. You can consult the documentation page EMI Mitigation for GNSS Applications for more information on this topic and to see their recommendations.

@Alex-Kushleyev Awesome Thank you!

@Alex-Kushleyev this is super helpful. Thank you.