I had the same issue. Updating the voxl_mpa_to_ros package resolved it for me: opkg update opkg install voxl-nodes

Thank you so much sir, Its working now

Thank you for your reply. Actually, I was using VOXL in a softAP mode and not in Station Mode that's why I was facing this issue.

@Alex-Gardner Thank you, that fixed the issue.

Hi @steveb2014 , Using a TELEM port should get you the same interface as standard Pixhawks, perhaps some params need to be changed for baud etc. Do you have specific issues or errors you are seeing? Thanks! Also, some info on our use of a gimbal with FlightCore here --> https://docs.modalai.com/voxl-m500-gimbal-user-guide/ although it was using a little 2-axis PWM controlled gimbal.... I think the MAVLink approach is better.

@chaitanya Sorry. My goal is that cell phone can control VOXL flight deck. Therefore, I need a MAVSDK library( e.g. libmavsdk.so) at Android. Then I can use the library to send command to control VOXL flight deck.

We have posted the Sentinel CAD which has the flight deck embedded. https://docs.modalai.com/sentinel-functional-description/#3d-step

We have posted the Sentinel CAD which has some of the s500 components embedded. We don't have the s500 frame as is. https://docs.modalai.com/sentinel-functional-description/#3d-step

@Chuck-Bokath Sounds like you were able to get a connection going? If not, I was going to suggest adding your ground station's IP to the voxl-vision-px4 config file under the qgc_ip setting.

We have a px4io board that will be in beta soon. It will enable more RC options. Do you have a specific protocol you are looking for?

In general, yes Microhard is designed for point to point robustness at longer range. Like all radios, your mileage may vary.

@Philemon-Benner No problem. But that's exactly why the decimator is there. It's often nicer to see lower frame rate with higher image quality.

Thanks for the heads up!

@Peter There is nothing that would prevent the VOXL Flight Deck or any of MODAL AI's kit from being used in a fixed wing configuration. The underlying autopilot, PX4 can be configured to fly a fixed wing aircraft. The software on the VOXL "brain" is tuned for quadcopters and will fly out of the box but with adjustments I'm sure it can be done. Someone from ModalAI can chime in, but it would not surprise me if other customers are already flying Modal kit on a variety of other platforms from ground, to sea, and other air configurations.

@沈-宏澤 Do you solve your problem? How to solve it?

@Moderator I didn't use docker. (certainly, the screenshot folder looks like inside docker) This problem was solved in another way I made a mistake in the port to insert the micro USB. [image: 1651901583482-%E3%82%B9%E3%82%AF%E3%83%AA%E3%83%BC%E3%83%B3%E3%82%B7%E3%83%A7%E3%83%83%E3%83%88-2022-05-07-143058.jpg] Thank you.

@stevet Thanks! We actually do have these, maybe we can just figure out the FOV of each camera from the respective data sheets.

@andyh Okay great, we do have your files in our database. I will send you your files via. an email to your account registered here in the next few minutes. Here are a list of the files I will send you: testsig-0xbb02a75f.so opencv_stereo_extrinsics.yml opencv_stereo_intrinsics.yml opencv_stereo_rear_extrinsics.yml opencv_stereo_rear_intrinsics.yml opencv_tracking_intrinsics.yml The steps you will do to fix your issue are as follows: Download all of the above files Create the /data/modalai directory on your RB5 with adb shell mkdir -p /data/modalai In your terminal, navigate to the directory where you saved the above files Push the camera calibration files to your RB5 with adb push *.yml /data/modalai/. Push the testsig file to your RB5 with adb push testsig*.so /usr/lib/rfsa/adsp/. After doing this the flashing script should be happy. It seems as though those files were somehow lost, possibly due to a re-flash with an older version of our script (newer versions such as the one in 1.0.5-M0052-9.1-perf-c save these files during the flashing process)