voxl-streamer client repetitive connect/disconnect

[Eric Katzfey]

@wilkinsaf Are either of these cameras cheap and easy to purchase?

[wilkinsaf]

I believe so. Let me find them online really quick. I was able to get the video's from the cameras streaming using the directions here: https://docs.modalai.com/uvc-streaming/

I moved over the ffmpeg ipk and executed
ffmpeg -i /dev/video2 -f mpegts udp://QCS_IP:4242

So I know that they are working.

[Eric Katzfey]

@wilkinsaf There are some clues here: https://github.com/gregkh/usbutils/issues/42. It seems like there are some endian issues with interpretation of the guidFormat field. For example, for my Logitech C270 test camera, lsusb reports the guidFormat as 32595559-0000-0010-8000-00aa00389b71 but libuvc (which voxl-uvc-server uses) reports the guidFormat as 59555932-0000-1000-8000-00aa00389b71. So, my guess is that since lsusb reports the guidFormat of your camera as 59555932-0000-1000-8000-00aa00389b71, libuvc (and hence voxl-uvc-server) will see it as 32595559-0000-0010-8000-00aa00389b71 which doesn't match any valid formats. I think I can hack libuvc to add the extra guidFormat and then your cameras will work but I won't be able to test it without one of your cameras. But I will post it and you can try it. For reference this is where libuvc needs to be modified to add the extra guidFormat: https://github.com/libuvc/libuvc/blob/37f00abd32b083a3d748f2a25c1c794578b51c16/src/stream.c#L109

[Eric Katzfey]

@wilkinsaf There is a new version of libuvc available at http://voxl-packages.modalai.com/dev/libuvc_1.0.2_202112182223.ipk with the changes. If you rebuild the dev branch of voxl-uvc-server and install build deps from dev you should pick up the new libuvc. Then you can rebuild and test with your camera.

[wilkinsaf]

@Eric-Katzfey roger that. thank you for your support here Eric

[wilkinsaf]

@Eric-Katzfey will post results after run

[wilkinsaf]

@Eric-Katzfey Sorry for being such a pain, but it seems like this repo keeps moving.

I went to https://gitlab.com/voxl-public/modal-pipe-architecture/voxl-uvc-server

but got this

I keep searching around for the repo, but can not find it

[Eric Katzfey]

@wilkinsaf Sorry, it was setup as private. I changed it to public. Can you try again?

[wilkinsaf]

@Eric-Katzfey Got it, thank you!

Will download and play with

[wilkinsaf]

@Eric-Katzfey Will it remain public?

[Eric Katzfey]

@wilkinsaf Yes, it will remain public. Did you get a chance to see if the changes worked?

[wilkinsaf]

@Eric-Katzfey Testing out today

[wilkinsaf]

@Eric-Katzfey

We seem to be having trouble finding the camera now which is weird. I wonder if we need to specifically download and install the drivers?

[Eric Katzfey]

@wilkinsaf No, you shouldn't need any drivers. Any USB device should be listed with lsusb, even without any specific drivers. Does it show up when plugged into a regular Linux computer?

[wilkinsaf]

@Eric-Katzfey Yes, we have hardwired it into a computer before. We have seen the stream using ffmpeg on VOXL as well. We just can not seem to get voxl-streamer to work with it

[Eric Katzfey]

@wilkinsaf If you unplug the camera from Voxl does anything disappear from the lsusb list?

[wilkinsaf]

@Eric-Katzfey

Yes, the top 3 entries in lsusb screenshots above are all cameras. I can unplug those one by one and see them disappear.
Would it matter if we have 2 UVC cameras?

[Eric Katzfey]

@wilkinsaf Just try one at a time for now. And when you plug the camera in do you see a new /dev/videoX entry appear?

[Eric Katzfey]

@wilkinsaf Also, were you able to get the ordering information for these cameras? If they aren't too expensive I would like to order at least one of them to test against.

[wilkinsaf]

@Eric-Katzfey

Yes, let me try one at a time now.
Here are the two cameras


1. Banggood URL

2. Blue Robotics URL