voxl-streamer client repetitive connect/disconnect
-
@Eric-Katzfey Sorry for being such a pain, but it seems like this repo keeps moving.
I went to https://gitlab.com/voxl-public/modal-pipe-architecture/voxl-uvc-server
but got this
I keep searching around for the repo, but can not find it
-
@wilkinsaf Sorry, it was setup as private. I changed it to public. Can you try again?
-
@Eric-Katzfey Got it, thank you!
Will download and play with
-
@Eric-Katzfey Will it remain public?
-
@wilkinsaf Yes, it will remain public. Did you get a chance to see if the changes worked?
-
@Eric-Katzfey Testing out today
-
We seem to be having trouble finding the camera now which is weird. I wonder if we need to specifically download and install the drivers?
-
@wilkinsaf No, you shouldn't need any drivers. Any USB device should be listed with
lsusb, even without any specific drivers. Does it show up when plugged into a regular Linux computer? -
@Eric-Katzfey Yes, we have hardwired it into a computer before. We have seen the stream using ffmpeg on VOXL as well. We just can not seem to get voxl-streamer to work with it
-
@wilkinsaf If you unplug the camera from Voxl does anything disappear from the
lsusblist? -
Yes, the top 3 entries in
lsusbscreenshots above are all cameras. I can unplug those one by one and see them disappear.
Would it matter if we have 2 UVC cameras? -
@wilkinsaf Just try one at a time for now. And when you plug the camera in do you see a new
/dev/videoXentry appear? -
@wilkinsaf Also, were you able to get the ordering information for these cameras? If they aren't too expensive I would like to order at least one of them to test against.
-
Yes, let me try one at a time now.
Here are the two cameras
 -
Good news, I was able to get voxl-uvc-server to spin up with one usb camera connected.
However, I am getting this issue from voxl-streamer
Seems like I need to figure out the frame size and set the correct one. Let me play around with that now
-
@Eric-Katzfey Doesn't look to be frame size as the "sizes" seem non-deterministic
-
@wilkinsaf Great, that's some progress! What about if you try the other camera? Not sure why the frame length is different. For a given resolution and frame format that number should be a constant. (e.g. 640 x 480 x 2).
-
Good suggestion. Let me try that.
Check out the length when uvc server fires upGot frame callback! frame_format = 3, width = 640, height = 480, length = 613376, ptr = 0interesting
-
@wilkinsaf You can try modifying this line in voxl-uvc-server: https://gitlab.com/voxl-public/modal-pipe-architecture/voxl-uvc-server/-/blob/dev/src/main.c#L83
Make it read:
.size_bytes = 614400, \Then rebuild it and try again.
-
@Eric-Katzfey Sounds good.
The other camera is giving me this error
The one I compiled could not find the device at all
