voxl-streamer client repetitive connect/disconnect
-
@Eric-Katzfey Sorry for being such a pain, but it seems like this repo keeps moving.
I went to https://gitlab.com/voxl-public/modal-pipe-architecture/voxl-uvc-server
but got this
I keep searching around for the repo, but can not find it
@wilkinsaf Sorry, it was setup as private. I changed it to public. Can you try again?
-
@wilkinsaf Sorry, it was setup as private. I changed it to public. Can you try again?
@Eric-Katzfey Got it, thank you!
Will download and play with
-
@wilkinsaf Sorry, it was setup as private. I changed it to public. Can you try again?
-
@Eric-Katzfey Will it remain public?
@wilkinsaf Yes, it will remain public. Did you get a chance to see if the changes worked?
-
@wilkinsaf Yes, it will remain public. Did you get a chance to see if the changes worked?
@Eric-Katzfey Testing out today
-
@wilkinsaf Yes, it will remain public. Did you get a chance to see if the changes worked?
We seem to be having trouble finding the camera now which is weird. I wonder if we need to specifically download and install the drivers?
-
We seem to be having trouble finding the camera now which is weird. I wonder if we need to specifically download and install the drivers?
@wilkinsaf No, you shouldn't need any drivers. Any USB device should be listed with
lsusb, even without any specific drivers. Does it show up when plugged into a regular Linux computer? -
@wilkinsaf No, you shouldn't need any drivers. Any USB device should be listed with
lsusb, even without any specific drivers. Does it show up when plugged into a regular Linux computer?@Eric-Katzfey Yes, we have hardwired it into a computer before. We have seen the stream using ffmpeg on VOXL as well. We just can not seem to get voxl-streamer to work with it
-
We seem to be having trouble finding the camera now which is weird. I wonder if we need to specifically download and install the drivers?
@wilkinsaf If you unplug the camera from Voxl does anything disappear from the
lsusblist? -
@wilkinsaf If you unplug the camera from Voxl does anything disappear from the
lsusblist?Yes, the top 3 entries in
lsusbscreenshots above are all cameras. I can unplug those one by one and see them disappear.
Would it matter if we have 2 UVC cameras? -
Yes, the top 3 entries in
lsusbscreenshots above are all cameras. I can unplug those one by one and see them disappear.
Would it matter if we have 2 UVC cameras?@wilkinsaf Just try one at a time for now. And when you plug the camera in do you see a new
/dev/videoXentry appear? -
Yes, the top 3 entries in
lsusbscreenshots above are all cameras. I can unplug those one by one and see them disappear.
Would it matter if we have 2 UVC cameras?@wilkinsaf Also, were you able to get the ordering information for these cameras? If they aren't too expensive I would like to order at least one of them to test against.
-
@wilkinsaf Also, were you able to get the ordering information for these cameras? If they aren't too expensive I would like to order at least one of them to test against.
Yes, let me try one at a time now.
Here are the two cameras
 -
@wilkinsaf Also, were you able to get the ordering information for these cameras? If they aren't too expensive I would like to order at least one of them to test against.
Good news, I was able to get voxl-uvc-server to spin up with one usb camera connected.
However, I am getting this issue from voxl-streamer
Seems like I need to figure out the frame size and set the correct one. Let me play around with that now
-
@wilkinsaf Also, were you able to get the ordering information for these cameras? If they aren't too expensive I would like to order at least one of them to test against.
@Eric-Katzfey Doesn't look to be frame size as the "sizes" seem non-deterministic
-
Good news, I was able to get voxl-uvc-server to spin up with one usb camera connected.
However, I am getting this issue from voxl-streamer
Seems like I need to figure out the frame size and set the correct one. Let me play around with that now
@wilkinsaf Great, that's some progress! What about if you try the other camera? Not sure why the frame length is different. For a given resolution and frame format that number should be a constant. (e.g. 640 x 480 x 2).
-
@wilkinsaf Great, that's some progress! What about if you try the other camera? Not sure why the frame length is different. For a given resolution and frame format that number should be a constant. (e.g. 640 x 480 x 2).
Good suggestion. Let me try that.
Check out the length when uvc server fires upGot frame callback! frame_format = 3, width = 640, height = 480, length = 613376, ptr = 0interesting
-
@Eric-Katzfey Doesn't look to be frame size as the "sizes" seem non-deterministic
@wilkinsaf You can try modifying this line in voxl-uvc-server: https://gitlab.com/voxl-public/modal-pipe-architecture/voxl-uvc-server/-/blob/dev/src/main.c#L83
Make it read:
.size_bytes = 614400, \Then rebuild it and try again.
-
@wilkinsaf You can try modifying this line in voxl-uvc-server: https://gitlab.com/voxl-public/modal-pipe-architecture/voxl-uvc-server/-/blob/dev/src/main.c#L83
Make it read:
.size_bytes = 614400, \Then rebuild it and try again.
@Eric-Katzfey Sounds good.
The other camera is giving me this error
The one I compiled could not find the device at all
-
@Eric-Katzfey Sounds good.
The other camera is giving me this error
The one I compiled could not find the device at all
@wilkinsaf Perhaps you are working on
masterbranch? The latest and greatest (The one you should be using) is thedevbranch.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login