@Dwangnoderbora loc_type should be set as "fixed"

@jarthur That video is quite outdated at this point, I would check out https://docs.modalai.com/voxl-developer-bootcamp/ for the most up to date info

@elfowl We treat package management and the base system image separately as the application level packages are updated much more frequently. Our enterprise customers follow this paradigm by modifying the SDK's offline installer to incorporate their packages

@Jw0719 See here how we setup an external flight controller (FCv2) with VOXL2: https://docs.modalai.com/voxl2-external-flight-controller/#add-on-boards You'll want to connect to "J5" on FCv2 (TELEM2)

Are static IPs over Ethernet supported?

@SMRazaRizvi Please upload the px4 logs to logs.px4.io , we can't access your shared drive

@tom @Shaun-Cosgrove Back up now

My setup is planning to use both the IO expander and a voxl ESC. Is there any update on support for using both simultaneously?

@Eric-Katzfey The RC is bind with the drone and it is able to control the drone. However, the check shows that there is no connection. Is the RC not bind correctly? Furthermore, when I perform takeoff and landing using the mavsdk program, there is an error on Visual Failure. Is the error in voxl-camera-server causes this error? [image: 1694482026732-offboard-takeoff-3.png]

@SHofmeester VOXL1 isn't fully supported with SDK 1.0 so I wouldn't expect things to work just yet. The amount of time from voxl-suite 0.7.0 to 1.0.0 is a few years so I'm sure there is a long list of reasons why your program no longer works

@kerct Not that I am aware of. You could look into Gazebo and see if there is a way to add that. Or you could create your own Gazebo extension to do this.

@afdrus Yes I figured that there are no camera intrinsics provided for the Hires camera. I obtained these params by myself.

@Moderator thank you for the reply, by board I meant the checkboard used for the calibration not the PCB. However, I watched the video, but it looks old because the current extrinsics procedure is asking me to move the checkboard in 4 poses whereas the video is showing only 2 poses. How much tilt should the checkboard have during the extrinsics calibration process in order to have a low calibration error?