Cannot communicate over adb/fastboot after flashing image
-
@Kashish-Garg-0 , I understand, thanks for clarifying.
My colleague, who has more experience with this, was out of office last week, coming back tomorrow. I will make sure he takes a look at your post, he may have some suggestions. @tom
Alex
-
@Kashish-Garg-0 With your device plugged in to your host pc via usb, what do you see with
lsusb
on your host PC? -
-
@Kashish-Garg-0 Okay so the device is booting into EDL mode, which is what is used for QDL flashing. Can you confirm that the EDL switch is turned off?
-
@tom Yes the EDL Switch is turned OFF, pointing away from the Processor
-
@Kashish-Garg-0 And when you went through the QDL process did the QDL flashing complete as expected? Should take around 10 minutes to complete
-
@tom I just re ran it and it took around 7 minutes or so and gave the appropriate output:
FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?> <data> <log value="INFO: Calling handler for setbootablestoragedrive" /></data> FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?> <data> <log value="INFO: Using scheme of value= 1" /></data> FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?> <data> <response value="ACK" rawmode="false" /></data> FIREHOSE WRITE: <?xml version="1.0"?> <data><power value="reset"/></data> FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?> <data> <log value="INFO: Calling handler for power" /></data> FIREHOSE READ: <?xml version="1.0" encoding="UTF-8" ?> <data> <response value="ACK" rawmode="false" /></data>
-
@Kashish-Garg-0 And then if you remove and replace both power and usb is it still booting to that same mode?
-
@tom You mean is it going to EDL mode after replacing power/usb and moving the EDL Switch to off?
Bus 005 Device 011: ID 05c6:900e Qualcomm, Inc. USB2.0 Hub
Is what is being printed with lsusb now
-
@Kashish-Garg-0 Sounds like we'll have get an RMA going for this one: https://www.modalai.com/pages/rma