Timeline for open-vins documentation
-
just for clarity here's the diff of the two params above:
--- px4.params 2024-10-30 16:15:04.683354722 +0100 +++ Downloads/params_update.params 2024-10-30 16:59:34.597742954 +0100 @@ -25,11 +25,11 @@ 1 1 CAL_ACC0_ID 2490378 6 1 1 CAL_ACC0_PRIO 50 6 1 1 CAL_ACC0_ROT -1 6 -1 1 CAL_ACC0_XOFF -0.004399999976158142 9 +1 1 CAL_ACC0_XOFF -0.041400000452995300 9 1 1 CAL_ACC0_XSCALE 1.000000000000000000 9 -1 1 CAL_ACC0_YOFF 0.004999999888241291 9 +1 1 CAL_ACC0_YOFF -0.014000000432133675 9 1 1 CAL_ACC0_YSCALE 1.000000000000000000 9 -1 1 CAL_ACC0_ZOFF -0.136299997568130493 9 +1 1 CAL_ACC0_ZOFF -0.050900001078844070 9 1 1 CAL_ACC0_ZSCALE 1.000000000000000000 9 1 1 CAL_ACC1_ID 0 6 1 1 CAL_ACC2_ID 0 6 @@ -44,9 +44,9 @@ 1 1 CAL_GYRO0_ID 2490378 6 1 1 CAL_GYRO0_PRIO 50 6 1 1 CAL_GYRO0_ROT -1 6 -1 1 CAL_GYRO0_XOFF 0.009499999694526196 9 -1 1 CAL_GYRO0_YOFF 0.012900000438094139 9 -1 1 CAL_GYRO0_ZOFF 0.003199999919161201 9 +1 1 CAL_GYRO0_XOFF 0.001399999950081110 9 +1 1 CAL_GYRO0_YOFF 0.019099999219179153 9 +1 1 CAL_GYRO0_ZOFF -0.001799999969080091 9 1 1 CAL_GYRO1_ID 0 6 1 1 CAL_GYRO2_ID 0 6 1 1 CAL_GYRO3_ID 0 6 @@ -54,17 +54,17 @@ 1 1 CAL_MAG0_PRIO 75 6 1 1 CAL_MAG0_ROT 0 6 1 1 CAL_MAG0_XCOMP 0.000000000000000000 9 -1 1 CAL_MAG0_XODIAG -0.002300000051036477 9 -1 1 CAL_MAG0_XOFF 0.019600000232458115 9 -1 1 CAL_MAG0_XSCALE 0.371300011873245239 9 +1 1 CAL_MAG0_XODIAG -0.027599999681115150 9 +1 1 CAL_MAG0_XOFF -0.093400001525878906 9 +1 1 CAL_MAG0_XSCALE 1.085199952125549316 9 1 1 CAL_MAG0_YCOMP 0.000000000000000000 9 -1 1 CAL_MAG0_YODIAG 0.009100000374019146 9 -1 1 CAL_MAG0_YOFF 0.122199997305870056 9 -1 1 CAL_MAG0_YSCALE 0.383500009775161743 9 +1 1 CAL_MAG0_YODIAG 0.014800000004470348 9 +1 1 CAL_MAG0_YOFF 0.249599993228912354 9 +1 1 CAL_MAG0_YSCALE 0.836799979209899902 9 1 1 CAL_MAG0_ZCOMP 0.000000000000000000 9 -1 1 CAL_MAG0_ZODIAG 0.008999999612569809 9 -1 1 CAL_MAG0_ZOFF -4.477099895477294922 9 -1 1 CAL_MAG0_ZSCALE 0.055500000715255737 9 +1 1 CAL_MAG0_ZODIAG -0.007000000216066837 9 +1 1 CAL_MAG0_ZOFF -0.107400000095367432 9 +1 1 CAL_MAG0_ZSCALE 1.048200011253356934 9 1 1 CAL_MAG1_ID 0 6 1 1 CAL_MAG1_ROT -1 6 1 1 CAL_MAG2_ID 0 6 @@ -632,10 +632,10 @@ 1 1 RC11_REV 1.000000000000000000 9 1 1 RC11_TRIM 1500.000000000000000000 9 1 1 RC12_DZ 0.000000000000000000 9 -1 1 RC12_MAX 1988.000000000000000000 9 -1 1 RC12_MIN 1011.000000000000000000 9 +1 1 RC12_MAX 2000.000000000000000000 9 +1 1 RC12_MIN 1000.000000000000000000 9 1 1 RC12_REV 1.000000000000000000 9 -1 1 RC12_TRIM 1499.000000000000000000 9 +1 1 RC12_TRIM 1500.000000000000000000 9 1 1 RC13_DZ 0.000000000000000000 9 1 1 RC13_MAX 2000.000000000000000000 9 1 1 RC13_MIN 1000.000000000000000000 9 @@ -668,44 +668,44 @@ 1 1 RC18_TRIM 1500.000000000000000000 9 1 1 RC1_DZ 10.000000000000000000 9 1 1 RC1_MAX 2000.000000000000000000 9 -1 1 RC1_MIN 1000.000000000000000000 9 +1 1 RC1_MIN 1001.000000000000000000 9 1 1 RC1_REV 1.000000000000000000 9 -1 1 RC1_TRIM 1500.000000000000000000 9 +1 1 RC1_TRIM 1499.000000000000000000 9 1 1 RC2_DZ 10.000000000000000000 9 1 1 RC2_MAX 2000.000000000000000000 9 -1 1 RC2_MIN 1000.000000000000000000 9 +1 1 RC2_MIN 1001.000000000000000000 9 1 1 RC2_REV 1.000000000000000000 9 -1 1 RC2_TRIM 1500.000000000000000000 9 +1 1 RC2_TRIM 1501.000000000000000000 9 1 1 RC3_DZ 10.000000000000000000 9 1 1 RC3_MAX 2000.000000000000000000 9 -1 1 RC3_MIN 1000.000000000000000000 9 +1 1 RC3_MIN 1001.000000000000000000 9 1 1 RC3_REV 1.000000000000000000 9 -1 1 RC3_TRIM 1500.000000000000000000 9 +1 1 RC3_TRIM 1001.000000000000000000 9 1 1 RC4_DZ 10.000000000000000000 9 1 1 RC4_MAX 2000.000000000000000000 9 -1 1 RC4_MIN 1000.000000000000000000 9 +1 1 RC4_MIN 1001.000000000000000000 9 1 1 RC4_REV 1.000000000000000000 9 -1 1 RC4_TRIM 1500.000000000000000000 9 +1 1 RC4_TRIM 1507.000000000000000000 9 1 1 RC5_DZ 10.000000000000000000 9 1 1 RC5_MAX 1988.000000000000000000 9 1 1 RC5_MIN 1011.000000000000000000 9 1 1 RC5_REV 1.000000000000000000 9 -1 1 RC5_TRIM 1500.000000000000000000 9 +1 1 RC5_TRIM 1499.000000000000000000 9 1 1 RC6_DZ 10.000000000000000000 9 1 1 RC6_MAX 1988.000000000000000000 9 1 1 RC6_MIN 1011.000000000000000000 9 1 1 RC6_REV 1.000000000000000000 9 -1 1 RC6_TRIM 1500.000000000000000000 9 +1 1 RC6_TRIM 1499.000000000000000000 9 1 1 RC7_DZ 10.000000000000000000 9 1 1 RC7_MAX 1988.000000000000000000 9 1 1 RC7_MIN 1011.000000000000000000 9 1 1 RC7_REV 1.000000000000000000 9 -1 1 RC7_TRIM 1500.000000000000000000 9 +1 1 RC7_TRIM 1499.000000000000000000 9 1 1 RC8_DZ 10.000000000000000000 9 1 1 RC8_MAX 1988.000000000000000000 9 1 1 RC8_MIN 1011.000000000000000000 9 1 1 RC8_REV 1.000000000000000000 9 -1 1 RC8_TRIM 1500.000000000000000000 9 +1 1 RC8_TRIM 1499.000000000000000000 9 1 1 RC9_DZ 0.000000000000000000 9 1 1 RC9_MAX 2000.000000000000000000 9 1 1 RC9_MIN 1000.000000000000000000 9 @@ -774,8 +774,8 @@ 1 1 SENS_BARO_QNH 1013.250000000000000000 9 1 1 SENS_BARO_RATE 20.000000000000000000 9 1 1 SENS_BOARD_ROT 0 6 -1 1 SENS_BOARD_X_OFF -0.067400000989437103 9 -1 1 SENS_BOARD_Y_OFF -0.318699985742568970 9 +1 1 SENS_BOARD_X_OFF -0.587000012397766113 9 +1 1 SENS_BOARD_Y_OFF -0.263300001621246338 9 1 1 SENS_BOARD_Z_OFF 0.000000000000000000 9 1 1 SENS_DPRES_OFF 0.000000000000000000 9 1 1 SENS_GPS_MASK 7 6 -
Yeah those parameters are changed when you calibrate some sensors. @Viktor-Gal can you try calibrating the imu_apps on your drones via voxl-calibrate-imu and then retry flying OVINS and see if that helps?
-
@Zachary-Lowell-0 so those params are after running
voxl-configure-mpa; i still dont understand why there's a diff between the apparently same v2 starlings.i can run the imu_apps calibration and retry OV.
-
@Zachary-Lowell-0 hey so i did what you suggested, here's the full output of openvins server but it's the very same behaviour; the qvio is nicely picking up the movements, openvins is just stationary on the portal. here are the detailed logs:
voxl2:~$ voxl-open-vins-server --verbosity 0 Setting printing level to: SILENT Setting printing level to: ALL Loading our own config file ================================================================= =========================AUTO RESET============================== en_auto_reset: 1 auto_reset_max_velocity: 20.000 auto_reset_max_v_cov_instant: 0.100 auto_reset_max_v_cov: 0.100 auto_reset_max_v_cov_timeout_s: 0.500 auto_reset_min_features: 1 auto_reset_min_feature_timeout_s: 3.000 auto_fallback_timeout_s: 3.000 auto_fallback_min_v: 0.600 en_cont_yaw_checks: false fast_yaw_thresh: 5.000 fast_yaw_timeout_s: 1.750 ===========================STATE================================= do fej: true imu avg: true use rk4 integration: true cam to imu refinement: true cam intrins refinement: true cam imu ts refinement: true max clone size: 8 max slam features: 40 max slam in update: 25 max msckf in update: 25 feat rep msckf: ANCHORED_MSCKF_INVERSE_DEPTH feat rep slam: ANCHORED_MSCKF_INVERSE_DEPTH cam imu time offset: 0.00150 slam delay: 1.00000 ================================================================= =====================INERTIAL INITIALIZER======================== gravity mag: 9.80665 init window time: 1.00000 init imu thresh: 1.00000 init dyn use: false ================================================================= ==========================IMU NOISE============================== imu sigma w: 0.00014 imu sigma wb: 0.00000 imu sigma a: 0.00389 imu sigma ab: 0.00006 ================================================================= ========================FEATURE NOISE============================ msckf chi^2 multiplier: 1.00000 msckf sigma px: 1.00000 slam chi^2 multiplier: 40.00000 slam sigma px: 1.80000 zupt chi^2 multiplier: 1.00000 zupt sigma px: 1.00000 ================================================================= =============================ZUPT================================ try zupt: true zupt max velocity: 0.03000 zupt only at beginning: true zupt noise multiplier: 1.00000 zupt max disparity: 3.00000 ================================================================= use mask: true use stereo: false use baro: false ================================================================= ========================FEATURE INITIALIZER====================== triangulate 1d: false refine features: false max runs: 5 init lamda: 0.00100 max lamda: 10000000000.00000 min dx: 0.00000 min dcost: 0.00000 lam mult: 10.00000 min dist: 0.10000 max dist: 60.00000 max baseline: 40.00000 num_opencv_threads: 9 fast_threshold: 15 histogram_method: HISTOGRAM knn_ratio: 0.70000 track_frequency: 15.00000 publish_frequency: 3 imu takeoff accel thresh: 0.10000 force init on takeoff: false use takeoff_camera_as: 0 takeoff_threshold(m): -0.100000 publish stats: false max_allowable_cep: 1.00000 force FLU to NED transform: false VIO always on (for bench testing): false ================================================================= ================================================================= Number of cameras found for this config: 1 [INFO] External feature trackers being used? false camera count: 1 MONO mode (using cam idx: 0) Number of cameras found for this config: 1 [INFO] External feature trackers being used? false camera count: 1 MONO mode (using cam idx: 0) Skipping camera group index: 2, not enabled Loading OpenCV intrinsics cal file from: /data/modalai/opencv_tracking_front_intrinsics.yml Loading OpenCV intrinsics cal file from: /data/modalai/opencv_tracking_down_intrinsics.yml cam_load_extrinsics_file World Rotation Matrix: 1.000000 0 0 0 1.000000 0 0 0 1.000000 load extrinsics 2 Using extrinsics under camera ID: tracking_front [INFO] Camera: 0 -- converted extrinsics *in FLU* are: Roll: -0.000000, Pitch 90.000000, Yaw -90.000000 (local) CAMERA ROTATION MATRIX: [0, 0, 1; -1, 0, 0; 0, -1, 0] (local) CAMERA TRANSLATION: 0.037 -0 -0.0006 Using extrinsics under camera ID: tracking_down [INFO] Camera: 1 -- converted extrinsics *in FLU* are: Roll: -0.000000, Pitch 180.000000, Yaw -360.000000 (local) CAMERA ROTATION MATRIX: [-1, 0, 0; 0, 1, 0; 0, 0, -1] (local) CAMERA TRANSLATION: -0.08825 0.0045 -0.00269 Done transfer camera configuration transfer ================================================================= ==========================CAMERA 0================================ name: tracking_front mode: MONO camera matrix: 460.27780 0.00000 621.21213 0.00000 459.85438 408.51998 0.00000 0.00000 1.00000 distortion coefficients: 0.05324 0.02329 -0.00926 0.00026 ==========================CAMERA 1================================ name: tracking_front mode: MONO camera matrix: 462.04073 0.00000 660.98324 0.00000 462.09738 397.45450 0.00000 0.00000 1.00000 distortion coefficients: 0.04984 0.04004 -0.02646 0.00611 =============================KLT================================= num_features_to_track: 30 grid_x: 5 grid_y: 5 min_pix_dist: 50 pyramid_levels: 5 [block] window_size: (25 x 25) ===========================KLTGYRO=============================== tmp_imu_name: imu_apps tracking_front wrt imu_apps: 0.00000 0.00000 1.00000 -1.00000 0.00000 0.00000 0.00000 -1.00000 0.00000 tracking_down wrt imu_apps: -1.00000 0.00000 0.00000 0.00000 1.00000 0.00000 0.00000 0.00000 -1.00000 Loading external config file =====> imu to read from: imu OpenVINS using fisheye camera OpenVINS FINAL Cam extrinsics to IMU for tracking_front: 7 -0.5 0.5 -0.5 0.5 0.037 -0 -0.0006 OpenVINS using fisheye camera OpenVINS FINAL Cam extrinsics to IMU for tracking_down: 7 -1.22465e-16 -1 -7.4988e-33 -6.12323e-17 -0.08825 0.0045 -0.00269 ++++++++++++++++++++++++++ OpenVINS reports number of cameras being used, regardless of delivery method (pipe, merge, etc...): 2 ++++++++++++++++++++++++++ VioManagerOptions.h:108 ESTIMATOR PARAMETERS: StateOptions.h:108 - use_fej: 1 StateOptions.h:109 - use_imuavg: 1 StateOptions.h:110 - use_rk4int: 1 StateOptions.h:111 - calib_cam_extrinsics: 1 StateOptions.h:112 - calib_cam_intrinsics: 1 StateOptions.h:113 - calib_cam_timeoffset: 1 StateOptions.h:114 - max_clones: 8 StateOptions.h:115 - max_slam: 40 StateOptions.h:116 - max_slam_in_update: 25 StateOptions.h:117 - max_msckf_in_update: 25 StateOptions.h:118 - max_aruco: 1024 StateOptions.h:119 - max_cameras: 2 StateOptions.h:120 - feat_rep_msckf: ANCHORED_MSCKF_INVERSE_DEPTH StateOptions.h:121 - feat_rep_slam: ANCHORED_MSCKF_INVERSE_DEPTH StateOptions.h:122 - feat_rep_aruco: GLOBAL_3D InertialInitializerOptions.h:125 INITIALIZATION SETTINGS: InertialInitializerOptions.h:150 - init_window_time: 1.00 InertialInitializerOptions.h:151 - init_imu_thresh: 1.00 InertialInitializerOptions.h:152 - init_max_disparity: 3.00 InertialInitializerOptions.h:153 - init_max_features: 0.00 InertialInitializerOptions.h:171 - init_dyn_use: 0 InertialInitializerOptions.h:172 - init_dyn_mle_opt_calib: 0 InertialInitializerOptions.h:173 - init_dyn_mle_max_iter: 20 InertialInitializerOptions.h:174 - init_dyn_mle_max_threads: 20 InertialInitializerOptions.h:175 - init_dyn_mle_max_time: 2.00 InertialInitializerOptions.h:176 - init_dyn_num_pose: 8 InertialInitializerOptions.h:177 - init_dyn_min_deg: 45.00 InertialInitializerOptions.h:178 - init_dyn_inflation_ori: 1.00e+01 InertialInitializerOptions.h:179 - init_dyn_inflation_vel: 1.00e+01 InertialInitializerOptions.h:180 - init_dyn_inflation_bg: 1.00e+02 InertialInitializerOptions.h:181 - init_dyn_inflation_ba: 1.00e+02 InertialInitializerOptions.h:182 - init_dyn_min_rec_cond: 1.00e-15 InertialInitializerOptions.h:188 - init_dyn_bias_g: 0.00, 0.00, 0.00 InertialInitializerOptions.h:189 - init_dyn_bias_a: 0.00, 0.00, 0.00 InertialInitializerOptions.h:216 NOISE PARAMETERS: InertialInitializerOptions.h:224 - gyroscope_noise_density: 0.000170 InertialInitializerOptions.h:225 - accelerometer_noise_density: 0.00200 InertialInitializerOptions.h:226 - gyroscope_random_walk: 0.0000194 InertialInitializerOptions.h:227 - accelerometer_random_walk: 0.003000 InertialInitializerOptions.h:228 - sigma_pix: 1.00 InertialInitializerOptions.h:318 STATE PARAMETERS: InertialInitializerOptions.h:319 - gravity_mag: 9.8066 InertialInitializerOptions.h:320 - gravity: 0.000, 0.000, 9.807 InertialInitializerOptions.h:321 - num_cameras: 2 InertialInitializerOptions.h:322 - use_stereo: 0 InertialInitializerOptions.h:323 - downsize cameras: 0 InertialInitializerOptions.h:332 - calib_camimu_dt: 0.0000 InertialInitializerOptions.h:348 cam_0_fisheye:1 cam_0_wh: 1280 x 800 cam_0_intrinsic(0:3): 460.278 459.854 621.212 408.52 cam_0_intrinsic(4:7): 0.0532387 0.0232891 -0.0092603 0.000263136 cam_0_extrinsic(0:3): -0.5 0.5 -0.5 0.5 cam_0_extrinsic(4:6): 0.037 -0 -0.0006 T_C0toI: 0 2.22045e-16 1 0.0006 -1 2.22045e-16 0 0.037 -2.22045e-16 -1 2.22045e-16 8.34888e-18 0 0 0 1 InertialInitializerOptions.h:348 cam_1_fisheye:1 cam_1_wh: 1280 x 800 cam_1_intrinsic(0:3): 462.041 462.097 660.983 397.455 cam_1_intrinsic(4:7): 0.0498391 0.040037 -0.0264578 0.0061076 cam_1_extrinsic(0:3): -1.22465e-16 -1 -7.4988e-33 -6.12323e-17 cam_1_extrinsic(4:6): -0.08825 0.0045 -0.00269 T_C1toI: -1 2.44929e-16 1.22465e-16 -0.08825 2.44929e-16 1 0 -0.0045 -1.22465e-16 2.99952e-32 -1 -0.00269 0 0 0 1 VioManagerOptions.h:121 - dt_slam_delay: 1.0 VioManagerOptions.h:122 - zero_velocity_update: 1 VioManagerOptions.h:123 - zupt_max_velocity: 0.03 VioManagerOptions.h:124 - zupt_noise_multiplier: 1.00 VioManagerOptions.h:125 - zupt_max_disparity: 3.0000 VioManagerOptions.h:126 - zupt_only_at_beginning?: 1 VioManagerOptions.h:127 - record timing?: 0 VioManagerOptions.h:128 - record timing filepath: ov_msckf_timing.txt VioManagerOptions.h:155 NOISE PARAMETERS: NoiseManager.h:62 - gyroscope_noise_density: 0.000140 NoiseManager.h:63 - accelerometer_noise_density: 0.00389 NoiseManager.h:64 - gyroscope_random_walk: 0.0000004 NoiseManager.h:65 - accelerometer_random_walk: 0.000055 VioManagerOptions.h:179 Updater MSCKF Feats: UpdaterOptions.h:45 - chi2_multipler: 1.0 UpdaterOptions.h:46 - sigma_pix: 1.00 VioManagerOptions.h:181 Updater SLAM Feats: UpdaterOptions.h:45 - chi2_multipler: 40.0 UpdaterOptions.h:46 - sigma_pix: 1.80 VioManagerOptions.h:183 Updater ARUCO Tags: UpdaterOptions.h:45 - chi2_multipler: 5.0 UpdaterOptions.h:46 - sigma_pix: 1.00 VioManagerOptions.h:185 Updater ZUPT: UpdaterOptions.h:45 - chi2_multipler: 1.0 UpdaterOptions.h:46 - sigma_pix: 1.00 VioManagerOptions.h:292 STATE PARAMETERS: VioManagerOptions.h:293 - gravity_mag: 9.8100 VioManagerOptions.h:294 - gravity: 0.000, 0.000, 9.810 VioManagerOptions.h:295 - camera masks?: 1 VioManagerOptions.h:304 - calib_camimu_dt: 0.0015 VioManagerOptions.h:320 cam_0_fisheye:1 cam_0_wh: 1280 x 800 cam_0_intrinsic(0:3): 460.278 459.854 621.212 408.52 cam_0_intrinsic(4:7): 0.0532387 0.0232891 -0.0092603 0.000263136 cam_0_extrinsic(0:3): -0.5 0.5 -0.5 0.5 cam_0_extrinsic(4:6): 0.037 -0 -0.0006 T_C0toI: 0 2.22045e-16 1 0.0006 -1 2.22045e-16 0 0.037 -2.22045e-16 -1 2.22045e-16 8.34888e-18 0 0 0 1 VioManagerOptions.h:320 cam_1_fisheye:1 cam_1_wh: 1280 x 800 cam_1_intrinsic(0:3): 462.041 462.097 660.983 397.455 cam_1_intrinsic(4:7): 0.0498391 0.040037 -0.0264578 0.0061076 cam_1_extrinsic(0:3): -1.22465e-16 -1 -7.4988e-33 -6.12323e-17 cam_1_extrinsic(4:6): -0.08825 0.0045 -0.00269 T_C1toI: -1 2.44929e-16 1.22465e-16 -0.08825 2.44929e-16 1 0 -0.0045 -1.22465e-16 2.99952e-32 -1 -0.00269 0 0 0 1 VioManagerOptions.h:426 FEATURE TRACKING PARAMETERS: VioManagerOptions.h:427 - use_stereo: 0 VioManagerOptions.h:428 - use_klt: 1 VioManagerOptions.h:429 - use_aruco: 0 VioManagerOptions.h:430 - downsize aruco: 1 VioManagerOptions.h:431 - downsize cameras: 0 VioManagerOptions.h:432 - num opencv threads: 9 VioManagerOptions.h:433 - use multi-threading pubs: 1 VioManagerOptions.h:434 - use multi-threading subs: 1 VioManagerOptions.h:435 - num_pts: 30 VioManagerOptions.h:436 - fast threshold: 15 VioManagerOptions.h:437 - grid X by Y: 5 by 5 VioManagerOptions.h:438 - min px dist: 50 VioManagerOptions.h:439 - hist method: 1 VioManagerOptions.h:440 - knn ratio: 0.700 VioManagerOptions.h:441 - track frequency: 15.0 VioManagerOptions.h:442 - limit imu propagation (windows based on init_imu+cam-imu delay): 1 FeatureInitializerOptions.h:87 - triangulate_1d: 0 FeatureInitializerOptions.h:88 - refine_features: 0 FeatureInitializerOptions.h:89 - max_runs: 5 FeatureInitializerOptions.h:90 - init_lamda: 0.001 FeatureInitializerOptions.h:91 - max_lamda: 10000000000.000 FeatureInitializerOptions.h:92 - min_dx: 0.0000010 FeatureInitializerOptions.h:93 - min_dcost: 0.0000010 FeatureInitializerOptions.h:94 - lam_mult: 10.000 FeatureInitializerOptions.h:95 - min_dist: 0.100 FeatureInitializerOptions.h:96 - max_dist: 60.000 FeatureInitializerOptions.h:97 - max_baseline: 40.000 FeatureInitializerOptions.h:98 - max_cond_number: 600000.000 Set camera intrinsics and extrinsics ====> Using Internal KLT feature tracker <==== >>>>>>>>>> Current reference counts: trackDB: 1 trackFEATS: 1 propagator: 2 updaterMSCKF: 1 updaterSLAM: 1 active_tracks_initializer: 1 initializer: 1 setting scheduler INFO: set FIFO priority successfully! create_server_pipes connecting client pipes Number of Cameras active: 2 Camera merge --- > ch: 1 to cam id: 0 Opening camera pipe: tracking_front tmp_camera_pipe_names.push_back(): tracking_front Camera merge --- > ch: 2 to cam id: 1 Opening camera pipe: tracking_down tmp_camera_pipe_names.push_back(): tracking_down imu pipe name: imu_apps Camera processing thread is now locked to the following cores: 7 VioManager.cpp:454 [TIME]: 0.0358 seconds for tracking VioManagerHelper.cpp:174 [init]: failed initialization in 0.0000 seconds VioManager.cpp:454 [TIME]: 0.0139 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,0 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0002 seconds VioManager.cpp:454 [TIME]: 0.0170 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,0 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0003 seconds VioManager.cpp:454 [TIME]: 0.0162 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,62 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0001 seconds VioManager.cpp:454 [TIME]: 0.0112 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,62 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0003 seconds VioManager.cpp:454 [TIME]: 0.0175 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,62 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0002 seconds VioManager.cpp:454 [TIME]: 0.0156 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,62 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0003 seconds VioManager.cpp:454 [TIME]: 0.0105 seconds for tracking InertialInitializer.cpp:127 [init]: not enough feats to compute disp: 0,62 < 15 VioManagerHelper.cpp:174 [init]: failed initialization in 0.0003 seconds VioManager.cpp:454 [TIME]: 0.0169 seconds for tracking InertialInitializer.cpp:134 [init]: *** disparity is 0.000,0.000 (3.00 thresh) InertialInitializer.cpp:145 [init]: USING STATIC INITIALIZER METHOD! IMU samples too small, make your window smaller (params.init_window_time), can't initalize 241.141469 - 240.222589 (0.918880) StaticInitializer.cpp:55 [init-s]: unable to select window of IMU readings, not enough readings VioManagerHelper.cpp:174 [init]: failed initialization in 0.0004 seconds VioManager.cpp:454 [TIME]: 0.0115 seconds for tracking InertialInitializer.cpp:134 [init]: *** disparity is 0.000,0.000 (3.00 thresh) InertialInitializer.cpp:145 [init]: USING STATIC INITIALIZER METHOD! StaticInitializer.cpp:104 [init-s]: IMU excitation stats: 0.029,0.014 VioManagerHelper.cpp:138 [init]: successful initialization in 0.0008 seconds VioManagerHelper.cpp:140 [init]: orientation = -0.0029, 0.0025, 0.0000, 1.0000 VioManagerHelper.cpp:142 [init]: bias gyro = 0.0025, 0.0000, 0.0016 VioManagerHelper.cpp:144 [init]: velocity = 0.0000, 0.0000, 0.0000 VioManagerHelper.cpp:146 [init]: bias accel = 0.0000, 0.0000, -0.0046 VioManagerHelper.cpp:148 [init]: position = 0.0000, 0.0000, 0.0000 VioManagerHelper.cpp:168 [init]: moved the state forward 0.00 seconds StateHelper.cpp:686 new augment clone at timestamp: 241.367844 waiting for enough clone states (1 of 5).... [INFO] TAKEOFF: DISPARITY disturbed, possible motion detected. Avg: 91.364071 (3.000000) # feats: 5 (20). UpdaterZeroVelocity.cpp:242 [ZUPT]: failed disparity (91.364 > 3.000, 5 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.003 (chi2 99.575 < 113.145) [INFO] TAKEOFF: DISPARITY disturbed, possible motion detected. Avg: 0.000000 (3.000000) # feats: 5 (20). UpdaterZeroVelocity.cpp:242 [ZUPT]: failed disparity (0.000 > 3.000, 5 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.007 (chi2 62.236 < 106.395) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.004 (chi2 88.421 < 119.871) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.004 (chi2 96.190 < 119.871) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.003 (chi2 132.910 < 119.871) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.003 (chi2 95.202 < 119.871) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.003 (chi2 76.613 < 106.395) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.002 (chi2 105.215 < 113.145) UpdaterZeroVelocity.cpp:233 [ZUPT]: passed disparity (0.000 < 3.000, 40 features) UpdaterZeroVelocity.cpp:255 [ZUPT]: accepted |v_IinG| = 0.002 (chi2 86.990 < 119.871) -
@Viktor-Gal said in Timeline for open-vins documentation:
i can run the imu_apps calibration and retry OV.
1 Reply Last reply about 15 hours ago Reply
a day ago
@Zachary-Lowell-0 so those params are after running voxl-configure-mpa; i still dont understand why there's a diff between the apparently same v2 starlings.
i can run the imu_apps calibration and retry OV.
RE: No you are sending the PX4 parameters not the voxl2 parameters. Runnign voxl-configure-mpa will configure some px4 parameters, but after you open up qgc and then calibrateall the sensors in there, it will change some of those parameters, hence why those specific to imu calibration and mag cal are different from drone to drone. I highly recommend sticking to qvio with single camera tracking for now as OVINS is still heavily in development.
-
@Zachary-Lowell-0 i hear you, but could you maybe give some pointers how one could make the qvio more stable? as i said it is at the moment only has 25% success rate: meaning 1 out of 5 flights i dont have problems with the qvio, the rest of the time the drone becomes unstable and crashes.
-
@Viktor-Gal have you read through the troubleshooting VIO documentation? https://docs.modalai.com/flying-with-vio/#troubleshooting-vio
-
@Moderator yep, back and forth. unfortunately no change.
-
@Moderator et.al. i just want to follow up that switching to the nightly builds that uses out of box the openvins implementation for VIO, is significantly better than the qvio. in other words, it actually fixed all the problems that we were facing with the QVIO.
-
@Viktor-Gal Excellent, thanks for the feedback!
-
I'll put a question here since it's open-vins documentation related. I also am successfully running nightly builds of open-vins, and it is working well for me.
I would like to add image masks to the tracking cameras to block out certain areas. I see the option "use_mask" in voxl-open-vins-server.conf, which I can set to true. I can't figure out where to put the mask files, or how to specify their path and file name?
If this should be a separate thread, please let me know and I can move my question elsewhere, cheers!
-
A Aaky referenced this topic
