voxl-PX4 maxes 2 CPUs
-
@Moderator Hi, I am using SDK1.0. No peripherals attached, just the VOXL2 Board alone.
-
@Rowan-Dempster No, that is definitely not expected. PX4 should only be using a small amount of CPU. Can you disable all other services so it's only PX4 running and see if that changes?
@Eric-Katzfey voxl-px4 and cpu-inspector were the only two services I have running
-
@Rowan-Dempster Can you also post the output of
voxl-inspect-servicesso we can see the CPU usage by each service -
@Rowan-Dempster If you run it as a service with
voxl-configure-px4do you see the same issue? -
@Rowan-Dempster If you run it as a service with
voxl-configure-px4do you see the same issue? -
@Rowan-Dempster If you run it as a service with
voxl-configure-px4do you see the same issue? -
@tom Here's the service log: https://drive.google.com/file/d/1JBxlCP5Ppelu4AFKIKV55oLfmyrgcdQC/view?usp=sharing
-
@tom Here's the service log: https://drive.google.com/file/d/1JBxlCP5Ppelu4AFKIKV55oLfmyrgcdQC/view?usp=sharing
@Rowan-Dempster If you are running voxl-px4 as a service you need to change your /etc/modalai/voxl-px4.conf file to enable daemon mode. Your log shows you have it disabled
DAEMON_MODE=DISABLE -
@Rowan-Dempster If you are running voxl-px4 as a service you need to change your /etc/modalai/voxl-px4.conf file to enable daemon mode. Your log shows you have it disabled
DAEMON_MODE=DISABLE@Eric-Katzfey I don't have that .conf file, even after I run voxl-configure-px4 (I just select enable)
-
@Eric-Katzfey I don't have that .conf file, even after I run voxl-configure-px4 (I just select enable)
-
@Rowan-Dempster You need to do
voxl-configure-px4 factory_enable
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login