Re: [voxl2 is not booting](/topic/4984/voxl2-is-not-booting)
-
@alex-kushleyev @vinny @eric-katzfey @modaltb
I was trying to unbrick the same voxl 2 again, which was successful and I was even able to flash the 1.4 SDK, and both showed successful. As I completed the reboot after flashing, the board went back to the boot mode, it is not able to pass the boot loop, the LED is constantly ON, ADB is unresponsive again.
Since the log data is huge, I am sharing the link to the log below. Please help me understand this behaviour.
-
@ModalAI-Team
If anyone could help me understand this behaviour and help me solve the boot issue, if there was any way, would mean a lot.I have 2 VOXL 2 which are not booting. which gave successful result in unbricking but did not detect ADB earlier. That was until last day when while trying unbricking the same boards, I got a positive result in one of the boards.
If this issue can solved by anyway, please help me out.
-
@ModalAI-Team
If anyone could help me understand this behaviour and help me solve the boot issue, if there was any way, would mean a lot.I have 2 VOXL 2 which are not booting. which gave successful result in unbricking but did not detect ADB earlier. That was until last day when while trying unbricking the same boards, I got a positive result in one of the boards.
If this issue can solved by anyway, please help me out.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login