Pinout Description of Image Sensor 4k High-resolution for VOXL (MSU-M0024)

Hung Pham

I dont see description of connector J1
Please share to me description and type of connector J1

alt text
Thank you!!

Vinny

Hi @Hung-Pham
Here is a generic link for it:
https://octopart.com/search?q=AXT436124¤cy=USD&specs=0
They are hard to get so we sell these and the mates if you need them for your designs.
https://www.modalai.com/collections/oem-components/products/oem-axt336124

https://www.modalai.com/collections/oem-components/products/oem-axt436124

Please note we are starting to design this connector out of our ecosystem on future products as it has been hard to source reliably, but we will continue to support existing designs or customers that have designed it in.

Hope this helps.

Moderator

As @Vinny points out, this module is not recommended for new designs

We definitely recommend looking into the modules that use micro-coax, like those found at https://modalai.com/m0173

Hung Pham

Thank you @Moderator and @Vinny

I have some question:

Can you send me the power consumption of the camera?
Logic level voltage of pin CAM0_RST0_N?
Where can I find detailed documentation for the camera?

Thank you for your support!

Vinny

Hi @Hung-Pham

Can you send me the power consumption of the camera?
M0024 is an IMX214:
Logic level voltage of pin CAM0_RST0_N?
All signals on our camera ports are 1.8V CMOS. We explain that here: https://docs.modalai.com/voxl2-connectors/#connector-callouts
Where can I find detailed documentation for the camera?
What else are you looking for? This may help: https://docs.modalai.com/image-sensors/

Hung Pham

Hi @Vinny

Thank you for your information.

Hung Pham

@Vinny Hi Vinny,

Can I use to CSI 2 Lane for Full HD 240fps?
Please, Let me know.

Thank you!

Vinny

HI @Hung-Pham
Pretty sure that is not possible on a 2-Lane interface.
Here is my rough homemade calculator I use to determine things like that:

With that fast of a frame rate, you need a 4-Lane port.
And, running at 2.5Gbps requires VERY short flexes, likely less than 50mm.
So, if we run it at 2Gbps, we are still at 4 lanes and this is much more stable:

But, all of this is moot if the SW does not support it. We cannot offer infinite flexibility of resolutions and frame rates. Please review this section in detail to see what combination of sensors and resolution are supported: https://docs.modalai.com/camera-video/

Hope this helped!

Hung Pham

@Vinny Thank you for your information!