Issues about ssh RB5

[tom]

@Qin-Yang You'll want the RB5 to be connected to the same WiFi network that you connected your macbook to.

You can do this on RB5 by running voxl-wifi station SSID PASSWORD where SSID is the name of the WiFi network you'd like to connect to and PASSWORD is the password to that network

[Qin Yang]

@tom Thank you very much for your guiding. It works.
However, I got another issues about the camera. I follow the instruction How to Connect VOXL to QGroundControl over WiFi
, but my rb5 did not have any video showing in the QGC. And I run the voxl-inspect-services and found voxl-streamer did not run. Moreover, my rb5 software might be an old version since I can not find the command like: voxl-inspect-mavlink. Can you give me some suggestions?

please check the below picture:

Thank you very much for your help and support.

[Moderator]

@Qin-Yang your software is too old for that feature. Please update to the latest, see the guide here: https://docs.modalai.com/Qualcomm-Flight-RB5-voxl-sdk-upgrade-guide/

[Qin Yang]

@Moderator Thank you very much for your suggestions. Currently, I install the latest version 1.1.2. And everything looks back in normal.
However, in the process of installation, I met some errors and I did not know whether it is a big issue.
Also, I found my original file miss some file : "opencv_stereo_intrinsics.yml" and "opencv_stereo_extrinsics.yml", can you send them to me.
Please check the pictures for more details:

[tom]

@Qin-Yang What is the serial number of your RB5 drone? There should be a sticker on the drone with a serial number in the form MXX00000XXX

[Qin Yang]

@tom The serial number is M22000006H2, please check the picture for more details. By the way, this rb5 bought in Sep. 29, 2023.

[Alex Kushleyev]

@Qin-Yang , I saw you also had some issues with ESC params not being updated correctly. Sorry about that, this sometimes happens when transitioning form older ESC firmware (which automatically happened during the SDK update)

You should be able to bring the ESC to the latest firmware / params using the following procedure : https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-esc/-/blob/dev/voxl-esc-tools/recovery.md

Thank you

[tom]

@Qin-Yang I will send your cal files to the email associated to your forum account

[Qin Yang]

@tom Thank you very much, I got it.

[Qin Yang]

@Alex-Kushleyev Thank you very much for the solution, I fix it and it works. : )