Issues with Microhard connection and VOXL 2
-
We believe you have a Microhard add-on plugged into a VOXL 2. If this is the case, the Microhard should be providing an IP connection to the VOXL 2's CPU.
It sounds like you might be trying to use VOXL 2 as an IP tether? That isn't something we support. If you want a USB dongle as tether, you don't need a VOXL 2. You can use this Microhard USB dongle here: https://www.modalai.com/products/mdk-m0048-2
-
We believe you have a Microhard add-on plugged into a VOXL 2. If this is the case, the Microhard should be providing an IP connection to the VOXL 2's CPU.
It sounds like you might be trying to use VOXL 2 as an IP tether? That isn't something we support. If you want a USB dongle as tether, you don't need a VOXL 2. You can use this Microhard USB dongle here: https://www.modalai.com/products/mdk-m0048-2
-
-
This post is deleted!
-
This post is deleted!
-
-
This post is deleted!
@aimseis which operating system is your PC running? If it's Linux, can you type
lsusb? -
-
This post is deleted!
-
-
This post is deleted!
-
@aimseis We can only really help with support on linux, I specifically recommend with Ubuntu 22.04.
-
This post is deleted!
-
@aimseis
-
The voxl-modem service doesn't need to keep running for the entire time. All it does is a run a few initialization steps and then exits, so that's not an issue.
-
I'll get someone from the hardware team to comment
@tom said in Issues with Microhard connection and VOXL 2:
@aimseis
- I'll get someone from the hardware team to comment
Per Microhard the ABS max of the 5V rail is +10% consistent with USB specs, so 5.5V.
Anything above that will risk damage to your device.
There are other components on our M0048 design that will be damaged at 6V.What voltage did you apply to this board @aimseis ?
-
-
@tom said in Issues with Microhard connection and VOXL 2:
@aimseis
- I'll get someone from the hardware team to comment
Per Microhard the ABS max of the 5V rail is +10% consistent with USB specs, so 5.5V.
Anything above that will risk damage to your device.
There are other components on our M0048 design that will be damaged at 6V.What voltage did you apply to this board @aimseis ?
-
@tom said in Issues with Microhard connection and VOXL 2:
@aimseis
- I'll get someone from the hardware team to comment
Per Microhard the ABS max of the 5V rail is +10% consistent with USB specs, so 5.5V.
Anything above that will risk damage to your device.
There are other components on our M0048 design that will be damaged at 6V.What voltage did you apply to this board @aimseis ?
This post is deleted! -
This post is deleted!
Hi @aimseis
When you use a plug-in board with Voxl or Voxl2, they and the plug-in board manage the input 5V and other voltages so all you need is to provide the correct power module to your Voxl or Voxl2, and the rest is handled.I'm not able to provide answers on shipping time as I am in Hardware Engineering, not shipping/production. Sorry.
-
-
This post is deleted!
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login