Broken Parts
-
@Bright-Nnadi I sent it at 10:18 PST
@tom which email address? Nnadibright33@gmail.com or bnnadi@islander.tamucc.edu?
-
-
@tom okay haven't anything yet
-
@Bright-Nnadi I will try your other email
@tom Okay thanks
-
Hey Tom,
Please i have been looking at y'alls documentation for a while now. I still haven't found the pinout of the VOXL 2 flight deck yet. Please can you send me a image with labelled pinouts of the VOXL Flight Deck.
-
Hi,
The connectors and pinouts for them can be found here
@Alex-Gardner Thanks Alex, so my VOXL 2 is already assembled so its hard for me to find where each pinout are located. The labels aren't showing because the 3D model is covering it. Is it possible to set up a meeting with you sometime or you can send a video where you are plugging in stuffs to the assembled VOXL 2. (I could also take out the 3D model but I prefer not too since its fragile)
-
@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now
-
@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now
@tom yes the VOXL CAM
-
@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now
@tom My bad I have been mixing up the VOXL CAM with the VOXL 2 all this time.
-
@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now
@tom Do y'all have sell the VOXL ESC USB interface
-
@Bright-Nnadi Is this what you're referencing? https://www.modalai.com/products/voxl-esc
-
@Bright-Nnadi Is this what you're referencing? https://www.modalai.com/products/voxl-esc
@tom I am talking about this https://docs.modalai.com/modal-esc-v2-manual/
-
@Bright-Nnadi Is this what you're referencing? https://www.modalai.com/products/voxl-esc
@tom Okay thanks Tom
-
Hey Tom , So i am trying to set up the VOXL CAM now. I have turned it on using the power module and the USB and the LED is solid green but I am not seeing the VOXL wifi.
-
-
@Bright-Nnadi When you say you aren't seeing the VOXL WiFi, are you saying you want VOXL to be in SoftAP and are trying to connect to it with a computer? Or are you trying to put it in station mode and have it connect to an external network?
@tom I am following the VOXL CAM Start guide and it says to connect to the VOXL wifi after powering it on. I am trying to connect it to my computer
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login