Broken Parts

[tom]

@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now

[Bright Nnadi]

@tom yes the VOXL CAM

[Bright Nnadi]

@tom My bad I have been mixing up the VOXL CAM with the VOXL 2 all this time.

[Bright Nnadi]

@tom Do y'all have sell the VOXL ESC USB interface

[tom]

@Bright-Nnadi Is this what you're referencing? https://www.modalai.com/products/voxl-esc

[Bright Nnadi]

@tom I am talking about this https://docs.modalai.com/modal-esc-v2-manual/

[tom]

@Bright-Nnadi Yes, that is the same as what I linked above.

[Bright Nnadi]

@tom Okay thanks Tom

[Bright Nnadi]

Hey Tom , So i am trying to set up the VOXL CAM now. I have turned it on using the power module and the USB and the LED is solid green but I am not seeing the VOXL wifi.

[tom]

@Bright-Nnadi When you say you aren't seeing the VOXL WiFi, are you saying you want VOXL to be in SoftAP and are trying to connect to it with a computer? Or are you trying to put it in station mode and have it connect to an external network?

[Bright Nnadi]

@tom I am following the VOXL CAM Start guide and it says to connect to the VOXL wifi after powering it on. I am trying to connect it to my computer

[tom]

@Bright-Nnadi Are you using ADB in order to access the VOXL's shell? If so, what is the output of ifconfig ?

[Bright Nnadi]

@tom output

[Bright Nnadi]

Tom right now I'm using the ADB and I want to enable the station mode. what SSID and password Im using for the command line adb shell voxl-wifi station <SSID> <Passowrd>

[tom]

@Bright-Nnadi Apologies I mean running ifconfig in adb shell

You will do the following:

adb shell

voxl-wifi station SSID PASS

where SSID is the name of the WiFi network you want to connect to and PASS is the password of that network.

You'll want to connect to whatever network your ground station is also connected to.

[Bright Nnadi]

@tom For some reason i am not able to get into the adb shell. And I am also using my organization's network which is private.

[Bright Nnadi]

@tom I'm trying to set up ADB now but this is happening

[Bright Nnadi]

@tom @Alex-Gardner I successfully installed adb but i am not still able to detect my VOXL CAM

[Bright Nnadi]

[tom]

@Bright-Nnadi Are you using a Virtual Machine or are you running Ubuntu natively?