Broken Parts
-
@tom Let me know when you have sent it please
-
@Bright-Nnadi I sent it at 10:18 PST
-
@tom which email address? Nnadibright33@gmail.com or bnnadi@islander.tamucc.edu?
-
-
@tom okay haven't anything yet
-
@Bright-Nnadi I will try your other email
-
@tom Okay thanks
-
Hey Tom,
Please i have been looking at y'alls documentation for a while now. I still haven't found the pinout of the VOXL 2 flight deck yet. Please can you send me a image with labelled pinouts of the VOXL Flight Deck.
-
Hi,
The connectors and pinouts for them can be found here
-
@Alex-Gardner Thanks Alex, so my VOXL 2 is already assembled so its hard for me to find where each pinout are located. The labels aren't showing because the 3D model is covering it. Is it possible to set up a meeting with you sometime or you can send a video where you are plugging in stuffs to the assembled VOXL 2. (I could also take out the 3D model but I prefer not too since its fragile)
-
@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now
-
@tom yes the VOXL CAM
-
@tom My bad I have been mixing up the VOXL CAM with the VOXL 2 all this time.
-
@tom Do y'all have sell the VOXL ESC USB interface
-
@Bright-Nnadi Is this what you're referencing? https://www.modalai.com/products/voxl-esc
-
@tom I am talking about this https://docs.modalai.com/modal-esc-v2-manual/
-
@Bright-Nnadi Yes, that is the same as what I linked above.
-
@tom Okay thanks Tom
-
Hey Tom , So i am trying to set up the VOXL CAM now. I have turned it on using the power module and the USB and the LED is solid green but I am not seeing the VOXL wifi.
-
@Bright-Nnadi When you say you aren't seeing the VOXL WiFi, are you saying you want VOXL to be in SoftAP and are trying to connect to it with a computer? Or are you trying to put it in station mode and have it connect to an external network?
