VOXL2 troubleshooting
-
I have two VOXL2 boards as parts of Starling drones. They were both unresponsive to ADB so I reinstalled the base firmware using the unbrick procedures. I was able to get a successful result from QDL for both the provisioning and flat build install, however, ADB from my Linux machine does not find the devices. How do I troubleshoot this further?
Thank you
-
@claw what does
lsusbreport? -
@Moderator here is a screenshot before and after plugging the usb cable in:
-
@claw It looks as though the board is booting into fastboot. At this point you should be able to install the voxl2_SDK with
./install.sh -
@tom oh, ok. I thought I'd have adb from the firmware. My mistake. Thanks for the help.
-
@tom I tried to install the SDK but it failed.
I did re-read the instructions for unbricking which do say that ADB should be available after installing the flat build. Is there a mechanism for returning the boards for repair?
-
@claw Can you double check that you're loading the correct QDL image? You'll need to determine whether your board is an M0054-1 or M0054-2
https://docs.modalai.com/m0054-versions/#m0054-1-and-m0054-2
