Hi @Abdulla-Ayyad
No we don't. Sorry.
We prioritize our Voxl based ecosystem.

Please see app note here

@wilkinsaf I came across this article from Logitech: https://www.logitech.com/en-us/video-collaboration/resources/think-tank/articles/taa-ndaa-compliant-products.html

Their webcams have worked well for us in the past so I'd think one of the mentioned products would work.

Sorry for the lag @brycek, we have some pending updates that clean up streaming and add support for full resolution. Let me know if you're up to try any pre-release software and we can try to get you a test build to validate things are OK for you now.

@Gerhold-Ten-Voorde hi @Gerhold-Ten-Voorde yes this snapshot resolution should be supported now as well.
I will send an email to you with a link to a nightly build to try out! Thanks!
-Travis

@Davon-Prewitt Can you please take a picture of your setup? Usually when this happens too many extension flex cables have been used and the system is on the margin

@modaltb,
Is there any news regarding this issue? Are you able to reproduce this phenomenon?

Hi @sspiller
This LED, D6, is an indicator that all power supplies for the board are ON (and GOOD) and the image sensor is OUT OF Reset.
e5f4c9b6-8d8a-4346-a0ce-833bf912f621-image.png
When you see it toggling OFF, it implies the VOXL/VOXL 2 is holding the image sensor in reset.

@RykerBarthold To connect 8 concurrently would require a significant amount of kernel and driver level modifications

@mkriesel I wonder if that is the reason why IMX678 product on modalai show as out-of-stock at the moment. I contacted FRAMOS and they told me that they did not develop the driver for the sensor but modalai probably did it themselves.

I am interested in using the M0040 TOF on one of my projects but I have some restrictions on the materials I can use. I also would like to know what materials the TOF is made from.

Hi @Sonoaero
That is a valid electrical connection scheme.
If you plug into either J6 or J7 of V2 Mini, you'll match the configuration shown here:
https://docs.modalai.com/voxl2-mini-image-sensors/#tracking
Keeping in mind M0076 only picks up the "lower" CSI group functions.

I cannot advise as to how SW will work on this config switching from M0014 (OV7251) to M0113 (OV9782), but it is valid electrically.

Hope this helps.
Thanks!

@Jetson-Nano hello!
which tutorial are you referring to?

@RykerBarthold OV9782 is definitely supported on VOXL 2

@Moderator Apologies for the lack of clarity. It's mentioned in an earlier version of the SDK (pre SDK 0.9.5), here in fact: https://docs.modalai.com/voxl-camera-server-0_9/ (search for "flip"). I added "flip" to the .conf file, but it didn't have an effect it seems. I haven't checked out 1.0 or 1.1 yet (I'm holding off on going past 0.9.5 until VOXL IO board is supported) but I'm hoping such basic image manipulation is available in those versions as well.

@Moderator Much appreciated !