Unable to bind controllers with starling 2
-
@taiwohazeez Have you reviewed this doc?
Orqa / GHST
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
You'll have to use the Orqa FPV controller, an ELRS commando will be incompatible with this receiver
-
@tom thank you for your help, I was able to bind two of my drones, but the other two keep saying unknown RX. Can you assist me with that ?
Thanks
-
@taiwohazeez Are they also equipped with Ghost receivers?
-
@tom yes, they were purchased together
-
@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared
-
@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared
-
@tom sorry to bother you once more, i got one more drone binded, but it refuses to get armed. I noticed that the ESC led (blue) isn't coming on. Do you have any suggestions?
Thanks.
-
@tom when i power up the drone, the led flashes, but after that, it stops
-
@taiwohazeez I recommend connecting the drone to QGroundControl via WiFi and then seeing what PX4 pre-arm checks are failing
-
@tom alright. Thank you for your time, I will do just that!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login