Unable to bind controllers with starling 2
-
@taiwohazeez Have you reviewed this doc?
https://docs.modalai.com/orqa-ghost/
You'll have to use the Orqa FPV controller, an ELRS commando will be incompatible with this receiver
-
@taiwohazeez Have you reviewed this doc?
https://docs.modalai.com/orqa-ghost/
You'll have to use the Orqa FPV controller, an ELRS commando will be incompatible with this receiver
-
@tom thank you for your help, I was able to bind two of my drones, but the other two keep saying unknown RX. Can you assist me with that ?
Thanks
-
@taiwohazeez Are they also equipped with Ghost receivers?
-
@tom yes, they were purchased together
-
@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared
-
@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared
-
@tom sorry to bother you once more, i got one more drone binded, but it refuses to get armed. I noticed that the ESC led (blue) isn't coming on. Do you have any suggestions?
Thanks.
-
@tom when i power up the drone, the led flashes, but after that, it stops
-
@taiwohazeez I recommend connecting the drone to QGroundControl via WiFi and then seeing what PX4 pre-arm checks are failing
-
@tom alright. Thank you for your time, I will do just that!
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login