Unable to bind controllers with starling 2
-
Hello, I have a four starling 2 drones, but I’ve not been able to fly any simply because I’ve not been able to bind my controllers to them. I initially got an orqa FPV controller, now I have a commando 8 elrs transmitter, I still can’t bind it. Can you kindly assist. Also my elrs LED on my drone keeps blinking between blue and pink, i think it’s not going into binding mode, despite using the command voxl-elrs —bind.
Thank you for your help.
Best,
Taiwo -
@taiwohazeez What is the SKU of your drone?
voxl-inspect-skuDo you know what receiver is on your drone? Ghost and ELRS would require different receivers
-
@tom SKU : MRB-D0014-4-V1-C27-T9-M0-X0
From the invoice, I can see Ghost Atto 2.4Ghz
Thanks -
@taiwohazeez Have you reviewed this doc?
https://docs.modalai.com/orqa-ghost/
You'll have to use the Orqa FPV controller, an ELRS commando will be incompatible with this receiver
-
@tom thanks. I’ve been able to bind two of them.
-
@tom thank you for your help, I was able to bind two of my drones, but the other two keep saying unknown RX. Can you assist me with that ?
Thanks
-
@taiwohazeez Are they also equipped with Ghost receivers?
-
@tom yes, they were purchased together
-
@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared
-
@tom alright. Thank you! I will look into it again, hopefully it binds
-
@tom sorry to bother you once more, i got one more drone binded, but it refuses to get armed. I noticed that the ESC led (blue) isn't coming on. Do you have any suggestions?
Thanks.
-
@tom when i power up the drone, the led flashes, but after that, it stops
-
@taiwohazeez I recommend connecting the drone to QGroundControl via WiFi and then seeing what PX4 pre-arm checks are failing
-
@tom alright. Thank you for your time, I will do just that!
-
@taiwohazeez No problem, it would also be helpful to know what SDK version is loaded on your drone. You can check this with
voxl-version
