Unable to bind controllers with starling 2

[taiwohazeez]

Hello, I have a four starling 2 drones, but I’ve not been able to fly any simply because I’ve not been able to bind my controllers to them. I initially got an orqa FPV controller, now I have a commando 8 elrs transmitter, I still can’t bind it. Can you kindly assist. Also my elrs LED on my drone keeps blinking between blue and pink, i think it’s not going into binding mode, despite using the command voxl-elrs —bind.

Thank you for your help.
Best,
Taiwo

[tom]

@taiwohazeez What is the SKU of your drone? voxl-inspect-sku

Do you know what receiver is on your drone? Ghost and ELRS would require different receivers

[taiwohazeez]

@tom SKU : MRB-D0014-4-V1-C27-T9-M0-X0

From the invoice, I can see Ghost Atto 2.4Ghz
Thanks

[tom]

@taiwohazeez Have you reviewed this doc?

https://docs.modalai.com/orqa-ghost/

You'll have to use the Orqa FPV controller, an ELRS commando will be incompatible with this receiver

[taiwohazeez]

@tom thanks. I’ve been able to bind two of them.

[taiwohazeez]

@tom thank you for your help, I was able to bind two of my drones, but the other two keep saying unknown RX. Can you assist me with that ?

Thanks

[tom]

@taiwohazeez Are they also equipped with Ghost receivers?

[taiwohazeez]

@tom yes, they were purchased together

[tom]

@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared

[taiwohazeez]

@tom alright. Thank you! I will look into it again, hopefully it binds

[taiwohazeez]

@tom sorry to bother you once more, i got one more drone binded, but it refuses to get armed. I noticed that the ESC led (blue) isn't coming on. Do you have any suggestions?

Thanks.

[taiwohazeez]

@tom when i power up the drone, the led flashes, but after that, it stops

[tom]

@taiwohazeez I recommend connecting the drone to QGroundControl via WiFi and then seeing what PX4 pre-arm checks are failing

[taiwohazeez]

@tom alright. Thank you for your time, I will do just that!

[tom]

@taiwohazeez No problem, it would also be helpful to know what SDK version is loaded on your drone. You can check this with voxl-version