Unable to bind controllers with starling 2

[tom]

@taiwohazeez Have you reviewed this doc?

Orqa / GHST

ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA

ModalAI Technical Docs (docs.modalai.com)

You'll have to use the Orqa FPV controller, an ELRS commando will be incompatible with this receiver

[taiwohazeez]

@tom thanks. I’ve been able to bind two of them.

[taiwohazeez]

@tom thank you for your help, I was able to bind two of my drones, but the other two keep saying unknown RX. Can you assist me with that ?

Thanks

[tom]

@taiwohazeez Are they also equipped with Ghost receivers?

[taiwohazeez]

@tom yes, they were purchased together

[tom]

@taiwohazeez I unfortunately don't have any knowledge that isn't on our public docs link that I shared

[taiwohazeez]

@tom alright. Thank you! I will look into it again, hopefully it binds

[taiwohazeez]

@tom sorry to bother you once more, i got one more drone binded, but it refuses to get armed. I noticed that the ESC led (blue) isn't coming on. Do you have any suggestions?

Thanks.

[taiwohazeez]

@tom when i power up the drone, the led flashes, but after that, it stops

[tom]

@taiwohazeez I recommend connecting the drone to QGroundControl via WiFi and then seeing what PX4 pre-arm checks are failing

[taiwohazeez]

@tom alright. Thank you for your time, I will do just that!

[tom]

@taiwohazeez No problem, it would also be helpful to know what SDK version is loaded on your drone. You can check this with voxl-version