Broken Parts
-
@Bright-Nnadi I will send you an email to your address on file with the forum.
-
@tom Alright thanks
-
@tom Let me know when you have sent it please
-
@Bright-Nnadi I sent it at 10:18 PST
-
@tom which email address? Nnadibright33@gmail.com or bnnadi@islander.tamucc.edu?
-
-
@tom okay haven't anything yet
-
@Bright-Nnadi I will try your other email
-
@tom Okay thanks
-
Hey Tom,
Please i have been looking at y'alls documentation for a while now. I still haven't found the pinout of the VOXL 2 flight deck yet. Please can you send me a image with labelled pinouts of the VOXL Flight Deck.
-
Hi,
The connectors and pinouts for them can be found here
-
@Alex-Gardner Thanks Alex, so my VOXL 2 is already assembled so its hard for me to find where each pinout are located. The labels aren't showing because the 3D model is covering it. Is it possible to set up a meeting with you sometime or you can send a video where you are plugging in stuffs to the assembled VOXL 2. (I could also take out the 3D model but I prefer not too since its fragile)
-
@Bright-Nnadi the photos you sent me were of a VOXL CAM not a VOXL2, is that what you are referencing? Or is this different hardware that you’re talking about now
-
@tom yes the VOXL CAM
-
@tom My bad I have been mixing up the VOXL CAM with the VOXL 2 all this time.
-
@tom Do y'all have sell the VOXL ESC USB interface
-
@Bright-Nnadi Is this what you're referencing? https://www.modalai.com/products/voxl-esc
-
@tom I am talking about this https://docs.modalai.com/modal-esc-v2-manual/
-
@Bright-Nnadi Yes, that is the same as what I linked above.
-
@tom Okay thanks Tom
