VOXL UVC Server not connecting

[Kris]

@Eric-Katzfey
This is where I am a little confused. Do I need to SSH into VOXL and run the

voxl:~$ voxl-uvc-server

in one terminal. Then open a new terminal, SSH into VOXL again and run

voxl:~$ voxl-streamer -c uvc-generic

[Kris]

@Eric-Katzfey Ok, Thank you!!! I finally got it working

[Eric Katzfey]

@Kris I usually use adb shell to setup two separate sessions. I run voxl-uvc-server in one and voxl-streamer in the other.

[Kris]

@Eric-Katzfey How can I change the frame rates, etc.
Or edit the config files?

[Kris]

@Eric-Katzfey I am trying to get better quality because I need to record via some type of Screen Recorder. I would prefer to save the recorded videos to an SD card, but I don't think that is possible.

[Eric Katzfey]

@Kris Yes, you can edit the config files to change resolution, frame rate, etc.

[Eric Katzfey]

@Kris We don't currently have a way to save to SD card from the UVC camera. However, you can create your own code to do this. This is a feature that we will be adding in the future.

[Kris]

@Eric-Katzfey Would I edit the config files from the "uvc-geneirc" at the top or the "uvc-video" at the bottom of the config files?

[Eric Katzfey]

@Kris If you are using the uvc-generic configuration then that is the one that you would edit.

[Kris]

@Eric-Katzfey Got it
Thank you for your help and quick responses

[local ad]

WOW what a great thread, so on time for me Thanks Kris