VOXL UVC Server not connecting
-
@Kris You run
voxl-uvc-serverto get the frames from the camera. See docs.modalai.com/voxl-uvc-server for more information. Then you runvoxl-streamer -c uvc-genericto create an RTSP stream that can be viewed remotely using VLC or QGC. Se docs.modalai.com/voxl-streamer for more information. -
@Kris You run
voxl-uvc-serverto get the frames from the camera. See docs.modalai.com/voxl-uvc-server for more information. Then you runvoxl-streamer -c uvc-genericto create an RTSP stream that can be viewed remotely using VLC or QGC. Se docs.modalai.com/voxl-streamer for more information. -
@Eric-Katzfey
This is where I am a little confused. Do I need to SSH into VOXL and run thevoxl:~$ voxl-uvc-serverin one terminal. Then open a new terminal, SSH into VOXL again and run
voxl:~$ voxl-streamer -c uvc-generic@Kris I usually use
adb shellto setup two separate sessions. I run voxl-uvc-server in one and voxl-streamer in the other. -
@Kris I usually use
adb shellto setup two separate sessions. I run voxl-uvc-server in one and voxl-streamer in the other. -
@Kris I usually use
adb shellto setup two separate sessions. I run voxl-uvc-server in one and voxl-streamer in the other. -
@Eric-Katzfey How can I change the frame rates, etc.
Or edit the config files?@Kris Yes, you can edit the config files to change resolution, frame rate, etc.
-
@Eric-Katzfey I am trying to get better quality because I need to record via some type of Screen Recorder. I would prefer to save the recorded videos to an SD card, but I don't think that is possible.
@Kris We don't currently have a way to save to SD card from the UVC camera. However, you can create your own code to do this. This is a feature that we will be adding in the future.
-
@Kris Yes, you can edit the config files to change resolution, frame rate, etc.
-
@Eric-Katzfey Would I edit the config files from the "uvc-geneirc" at the top or the "uvc-video" at the bottom of the config files?
@Kris If you are using the uvc-generic configuration then that is the one that you would edit.
-
@Kris If you are using the uvc-generic configuration then that is the one that you would edit.
-
WOW what a great thread, so on time for me Thanks Kris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login