Which LTE CARRIER SHOULD I ORDER FOR CANADA
-
Hi I would like to know which LTE modem carrier should I order or a custom one would be needed ?
-
Check out the datasheet here, I assume one of the bands will be supported in Canada. Which Canadian cellular carrier are you trying to use?
V2 LTE Modem and USB Add-On Datasheet
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
-
This page seems to have good information: https://www.signalbooster.com/pages/what-are-4g-lte-frequencies-bands-of-telus-rogers-bell
-
VOXL-ACC-LTEH-7610 seems like it should work on each of those carriers
-
Yes, thank you I am trying to use a rogers SIM CARD, So I should order the LTE modem with the US Carrier (WP7610) right ?
-
Should I be worried that the US carrier does not cover B7 band?
-
I got the modem but, i am not sure it is working. I don't get any ip
-
Have you followed the instructions? https://docs.modalai.com/lte-v2-modem-manual/
Also, you will need to know the APN for your carrier and set it properly. You can look at the voxl-modem source code for how to set the APN
-
Yes I followed the instructions. Yes I know the apn carrier of my provider. I used before. Also my wifi set up is on does it matter?
-
This is the apn I used: just type ltemobile.apn
When it ask for it in the configuration.https://www.rogers.com/customer/support/article/rogers-lte-apn-settings
-
This is the apn I used: just type ltemobile.apn
When it ask for it in the configuration.https://www.rogers.com/customer/support/article/rogers-lte-apn-settings
-
these are the outputs:
wait the first one changed:
-
-
okay that worked, one more question for the openVPN I am new to yocto linux, how do I know if the daemon was able to connect to the openVPN server, my IP still the same.
-
OpenVPN will usually create a new network interface, similar to
tunortun0and should route traffic through there. If you runifconfigyou will see a list of network interfaces. You will also need to make sure that OpenVPN is starting after you have connected to the internet as it will most likely fail to connect to the VPN and not retry with default settings. -
OpenVPN will usually create a new network interface, similar to
tunortun0and should route traffic through there. If you runifconfigyou will see a list of network interfaces. You will also need to make sure that OpenVPN is starting after you have connected to the internet as it will most likely fail to connect to the VPN and not retry with default settings. -
@tom thanks apparently the openvpn version needed to be updated the default version that comes with voxl does not work for me
@Aldo-Castro-Freire thanks for the feedback, do you mind sharing the openVPN Client and Server versions you ended up using that worked?
We've tested using server v2.4.8, voxl-vpn (v2.1.3 inside that), and OpenVPN Connect ver 3.2.2 on Adroid.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login