FC v2 Collision prevention issue with voxl 2
-
I have the ark flow MR attached to the FC. While I want to check the standard builds, the standard build do not have UAVCAN modules enabled. i have to enable them manually.
If anyone could share the built px4 file for the ModalAi FC v2 along with UAVCAN enabled and collision prevention working, It would mean alot.
@Jetson-Nano Can you open the question about UAVCAN in a separate post? It has nothing to do with the initial question and we like each separate issue to have it's own posting / title. Thanks!
-
@Jetson-Nano Can you open the question about UAVCAN in a separate post? It has nothing to do with the initial question and we like each separate issue to have it's own posting / title. Thanks!
@Eric-Katzfey I will do that.
-
@Alex-Kushleyev @Eric-Katzfey @Vinny
I am using modalai fc v2 with voxl 2 , i am able to see the obstacle_distance message publishing in the mavlink console, but the drone is not slowing down or stopping.
the parameters are
mpc_pos_mode - acceleration based
cp_dist - 1 m
cp_no_go_data - enabled
cp_angle - 0I checked with various builds and versions of PX4 from both PX4 github and Modalai github.
can anyone help me with which version or fork it works.
nsh> listener obstacle_distance TOPIC: obstacle_distance obstacle_distance timestamp: 178940124 (0.026434 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [236, 237, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 184239763 (0.014512 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [236, 236, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 199589325 (0.028254 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [236, 236, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 204539470 (0.012805 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [445, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 206838947 (0.036977 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [435, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 208539592 (0.000817 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [436, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 210039039 (0.006330 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [435, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 223538159 (0.007192 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [114, 102, 98, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 129, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 225588237 (0.036362 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [93, 90, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 227187560 (0.049067 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh> listener obstacle_distance 10 TOPIC: obstacle_distance obstacle_distance timestamp: 228587517 (0.043813 seconds ago) increment: 10.00000 angle_offset: 0.00000 distances: [2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001, 2001] min_distance: 0 max_distance: 2000 frame: 12 sensor_type: 4 nsh>Looking through the PX4 codebase, the ARK Flow MR publishes to distance_sensor by default, not obstacle_distance. Have you made any changes to the codebase that would affect obstacle_distance or mounted any other sensors?
Also, how have you mounted the ark_flow_mr. Is it pointing downwards on the vehicle, or forward pointing or some other configuration?
Finally, have you tried setting the distance for collision prevention higher, and seeing how the drone reacts in that case?
-
Looking through the PX4 codebase, the ARK Flow MR publishes to distance_sensor by default, not obstacle_distance. Have you made any changes to the codebase that would affect obstacle_distance or mounted any other sensors?
Also, how have you mounted the ark_flow_mr. Is it pointing downwards on the vehicle, or forward pointing or some other configuration?
Finally, have you tried setting the distance for collision prevention higher, and seeing how the drone reacts in that case?
@Sean-Hickey I am using the optical flow sensor for position hold, it is attached directly to the FC.
I am getting the obstacle_distance messages from the TOF sensor and I am able to see it.
I did check with 1 m cp_dist and it was not working. -
@Sean-Hickey I am using the optical flow sensor for position hold, it is attached directly to the FC.
I am getting the obstacle_distance messages from the TOF sensor and I am able to see it.
I did check with 1 m cp_dist and it was not working.What TOF sensor are you using for obstacle distance?
Just confirming, you are using the ARK Flow MR facing downwards just for optical flow and position hold, but not for collision prevention?
-
What TOF sensor are you using for obstacle distance?
Just confirming, you are using the ARK Flow MR facing downwards just for optical flow and position hold, but not for collision prevention?
@Sean-Hickey PMD tof that comes with yellow board M0173 - https://docs.modalai.com/M0173/
Yes optical flow is facing down, it is used for position hold and not for collision prevention.
-
@Sean-Hickey PMD tof that comes with yellow board M0173 - https://docs.modalai.com/M0173/
Yes optical flow is facing down, it is used for position hold and not for collision prevention.
Can you see if you are using the MO169 or the MO178?
-
Can you see if you are using the MO169 or the MO178?
@Sean-Hickey I am using M0178
-
@Sean-Hickey I am using M0178
I was able to identify the issue.
mpc_pos_mode - acceleration based doesn't call Collision Prevention in any of the newest PX4 builds..
You need to use mpc_pos_mode - Simple Position Control (0) or mpc_pos_mode - smooth position control (3).
I was able to test this on a similar setup, and confirmed that collision prevention only worked with the mpc_pos_mode indicated above, and notably did not with mpc_pos_mode acceleration.
-
I was able to identify the issue.
mpc_pos_mode - acceleration based doesn't call Collision Prevention in any of the newest PX4 builds..
You need to use mpc_pos_mode - Simple Position Control (0) or mpc_pos_mode - smooth position control (3).
I was able to test this on a similar setup, and confirmed that collision prevention only worked with the mpc_pos_mode indicated above, and notably did not with mpc_pos_mode acceleration.
@Sean-Hickey that great, just making sure, did you use optical flow with FC?
Also could you let me know which branch you used, or the Px4 built file. i want to test it out in my setup.
-
@Sean-Hickey that great, just making sure, did you use optical flow with FC?
Also could you let me know which branch you used, or the Px4 built file. i want to test it out in my setup.
I used VIO with FC, but the path from obstacle detection to Collision Prevention is unchanged between the 2 modes.
I used the mainline ModalAI PX4 SDK branch. I can share the built px4 deb build with you if that's helpful, but I would try changing the mpc_pos_mode parameter first on your current build to see if that fixes your issue.
-
I used VIO with FC, but the path from obstacle detection to Collision Prevention is unchanged between the 2 modes.
I used the mainline ModalAI PX4 SDK branch. I can share the built px4 deb build with you if that's helpful, but I would try changing the mpc_pos_mode parameter first on your current build to see if that fixes your issue.
@Sean-Hickey
I already checked with changing the MPC_POS_MODE, did not work.Could you share the file, I would like to test it out.
-
@Sean-Hickey
I already checked with changing the MPC_POS_MODE, did not work.Could you share the file, I would like to test it out.
I attached the link above, I am using parameters:
MPC_POS_MODE: Simple position control
CP_DIST 1.5 m
CP_DELAY 0.4 s
CP_GUIDE_ANG : 0 deg
CP_GO_NO_DATA: Enabled -
@Sean-Hickey
I already checked with changing the MPC_POS_MODE, did not work.Could you share the file, I would like to test it out.
If this doesn't work, on the mavlink console (after testing the collision prevention) call:
listener obstacle_distance_fused 1
listener collision_constraints 1and let me know the results.
-
If this doesn't work, on the mavlink console (after testing the collision prevention) call:
listener obstacle_distance_fused 1
listener collision_constraints 1and let me know the results.
@Sean-Hickey
sorry to disturb you again .
I am not able to flash with the deb file, could you please share the.px4file -
If this doesn't work, on the mavlink console (after testing the collision prevention) call:
listener obstacle_distance_fused 1
listener collision_constraints 1and let me know the results.
I tested with this firmware
modalai_fc-v2_1.14.0-2.0.133.px4from (http://voxl-packages.modalai.com/dists/fc-v2/sdk-1.6/) and it worked, but there is no uavcan thats the only problem.I checked with the parameters you mentioned.
When i reduce the cp_dist it stops working but with 1.5 m it is working.
-
I tested with this firmware
modalai_fc-v2_1.14.0-2.0.133.px4from (http://voxl-packages.modalai.com/dists/fc-v2/sdk-1.6/) and it worked, but there is no uavcan thats the only problem.I checked with the parameters you mentioned.
When i reduce the cp_dist it stops working but with 1.5 m it is working.
@Jetson-Nano Can you rebuild to add UAVCAN? The code is here: https://github.com/modalai/px4-firmware/tree/v1.14.0-2.0.133-dev
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login