Starling MAX
-
Hello,
We had to replace the power/ESC module on our Starling MAX and now we cannot arm the drone. voxl-esc scan seems to detect the ESC, but perhaps we are missing some configuration. There are a number of setup_ commands for voxl-esc, but it is not clear which applies to the Starling Max. How can we set up the new ESC?
Thanks,
Tom -
@Thomas-Eiszler I would recommend just running
voxl-configure-mpa
which will ensure you have the correct services configured and running as well as check the ESCs firmware and params and will update them if necessary