avoidance collision prevention disabled

[tom]

@AP123 In portal you aren't seeing anything when you select "Stereo Front Disparity" for example?

[AP123]

@tom

nope nothing

[tom]

@AP123 What about the "stereo" one itself?

[AP123]

@tom yes i have camera feed there

[AP123]

@tom ok, i am getting data now from all off them! Although the avoidance system is still not working

[tom]

@AP123 might be worth trying this to see if the voxl-vision-px4 is handling the avoidance data correctly: https://docs.modalai.com/voxl-vision-px4-collision-prevention-0_9/#debugging-collision-prevention

[AP123]

@tom The data is flowing properly but QGC is still saying Not Ready, and Avoidance system not ready. What else can i do?

[tom]

@AP123 When you click on Not Ready does it give you any more info?

[AP123]

@tom it does not, I'm trying to read errors in the log but there are so many and none say anything relating to avoidance system.

[tom]

@AP123 What hardware setup are you using? One of our drones or a custom setup?

[AP123]

@tom custom setup. I have calibrated the front stereo but the rear is giving me issues could that be why?

[tom]

@AP123 It's possible, I would take a look here as well for some relevant info: https://docs.modalai.com/configure-extrinsics/

[AP123]

@tom Thank you i will take a look at that today. The error i am getting the most in the logs is this one

[E] at qrc:/qml/QGroundControl/FlightDisplay/ObstacleDistanceOverlayMap.qml:42 - "qrc:/qml/QGroundControl/FlightDisplay/ObstacleDistanceOverlayMap.qml:42: Error: createRadialGradient(): Incorrect arguments"

Is that something to do with the avoidance system?

Thank you

[AP123]

@tom hey tom when i send voxl-inspect-points tof_pc to the voxl the output is only waiting for server at /run/mpa/tof_pc/
no data is seen, is this the issue?

[AP123]

@tom i discovered if there are objects in the surrounding of the drone object avoidance reads disabled, yet if it is in open space it reads error.

[tom]

@AP123 I'm at the end of my personal knowledge with VOA, I'll see if I can tag someone in

[AP123]

@tom Both brand new voxl 2 units from you guys 1 with SDK 0.9.5 and 1 with SDK 1.0.0 are both saying avoidance system not ready, one of your engineers must have encountered this before.

[Cliff Wong]

@AP123 Hey there. Are you running VOA against a stereo camera pair or via a ToF sensor?

If you run voxl-inspect-points voa_pc_out and see data, then the voxl2 SDK services are good and generating the correct mavlink obstacle distance points to PX4. If not then there's a configuration issue.

If that is good, then you need to make sure PX4 has
MPC_POS_MODE = Simple pos control or smooth pos control, COM_OBS_AVOID is enabled, CP_DIST > 0 (e.g. 2) and you must have an established home position (or good position from qvio if that is the case). Typically an "obstacle system not ready" is due to the MPC_POS_MODE (I think we default to acceleration-based input).

If all those check out, then it's likely missing a home position requirement in PX4 & not voxl, and we'll need to look that up.

[AP123]

@Cliff-Wong said in avoidance collision prevention disabled:

voxl-inspect-points voa_pc_out

Thank you Cliff for your support, everything is set properly and i am getting data from oxl-inspect-points voa_pc_out.

Isn't home position set once i arm the drone? How can i do that if it wont let me arm it?

[tom]

@AP123 We just released SDK 1.1 yesterday which contains a few months worth of bug fixes, I would recommend loading that and seeing if your issue is resolved