Subcategories

• ---

• PCB Design Reviews

  Request design review. Custom expansion details - https://docs.modalai.com/voxl2-custom-expansion/

  5 14
  5 Topics

  14 Posts

  V

  @Pelle-Bredegg-Hermansen Hi Pelle, I emailed you the schematic review report for your considerations, just wanted to post here this task is completed. Keep us posted! Thanks!
• System Architecture Design Reviews

  Request feedback on your system design, PCB connections, etc - Supported Architectures https://docs.modalai.com/voxl2-supported-architectures/

  8 27
  8 Topics

  27 Posts

  E

  Hey @alex-kushleyev, good to know it holds up like that under load, and thanks again for the reply. Two things I'm trying to pin down on the Mini: Power. Can a USB port on the VOXL Mini actually supply around 2-2.5 W, and can it do that on one port while a small USB camera runs on the other? Or should I plan to power those externally? Extra camera slot. From the D0013-V2 CAD the imager board looks like 5 DF56 coax connectors with 4 used (EO + dual AR0144 + Boson+), and the Lepton is on the M0187 SPI adapter so it's off the CSI bus. Is that spare coax connector wired to a usable CSI lane, and would voxl-camera-server take a 5th sensor (an M0161) there without a custom config? Thanks, Eyal