Throttle not working in Stabilize mode
-
Hello all,
I have a custom build using the voxl2-mini running px4 but I have this very weird issue where once I arm the drone in stabilize mode, and see them spinning at the arm speed, the motors don't respond to any inputs from the RC controller. A few things to know are that I don't have a GPS or MAG, the inputs work completely fine in acro mode, and other modes, such as position and althold produce the same bug as stabilize. Here is a PX4 flight log.
Any help would be appreciated,
Thanks,
Sam -
Hello all,
I have a custom build using the voxl2-mini running px4 but I have this very weird issue where once I arm the drone in stabilize mode, and see them spinning at the arm speed, the motors don't respond to any inputs from the RC controller. A few things to know are that I don't have a GPS or MAG, the inputs work completely fine in acro mode, and other modes, such as position and althold produce the same bug as stabilize. Here is a PX4 flight log.
Any help would be appreciated,
Thanks,
Sam@Samuel-Marchetti Can you try setting MAV_TYPE to 14, then power cycle and try the stabilized flight again?
-
@Samuel-Marchetti Can you try setting MAV_TYPE to 14, then power cycle and try the stabilized flight again?
@Eric-Katzfey Thank you so much this fixed the issue!
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login