<![CDATA[Throttle not working in Stabilize mode]]>Hello all,

I have a custom build using the voxl2-mini running px4 but I have this very weird issue where once I arm the drone in stabilize mode, and see them spinning at the arm speed, the motors don't respond to any inputs from the RC controller. A few things to know are that I don't have a GPS or MAG, the inputs work completely fine in acro mode, and other modes, such as position and althold produce the same bug as stabilize. Here is a PX4 flight log.

Any help would be appreciated,

Thanks,
Sam

]]>https://forum.modalai.com/topic/5291/throttle-not-working-in-stabilize-modeRSS for NodeThu, 25 Jun 2026 03:45:24 GMTWed, 24 Jun 2026 18:49:17 GMT60<![CDATA[Reply to Throttle not working in Stabilize mode on Wed, 24 Jun 2026 19:45:53 GMT]]>@Eric-Katzfey Thank you so much this fixed the issue!

]]>https://forum.modalai.com/post/26240https://forum.modalai.com/post/26240Wed, 24 Jun 2026 19:45:53 GMT<![CDATA[Reply to Throttle not working in Stabilize mode on Wed, 24 Jun 2026 19:12:00 GMT]]>@Samuel-Marchetti Can you try setting MAV_TYPE to 14, then power cycle and try the stabilized flight again?

]]>https://forum.modalai.com/post/26238https://forum.modalai.com/post/26238Wed, 24 Jun 2026 19:12:00 GMT