Throttle not working in Stabilize mode
-
Hello all,
I have a custom build using the voxl2-mini running px4 but I have this very weird issue where once I arm the drone in stabilize mode, and see them spinning at the arm speed, the motors don't respond to any inputs from the RC controller. A few things to know are that I don't have a GPS or MAG, the inputs work completely fine in acro mode, and other modes, such as position and althold produce the same bug as stabilize. Here is a PX4 flight log.
Any help would be appreciated,
Thanks,
Sam -
Hello all,
I have a custom build using the voxl2-mini running px4 but I have this very weird issue where once I arm the drone in stabilize mode, and see them spinning at the arm speed, the motors don't respond to any inputs from the RC controller. A few things to know are that I don't have a GPS or MAG, the inputs work completely fine in acro mode, and other modes, such as position and althold produce the same bug as stabilize. Here is a PX4 flight log.
Any help would be appreciated,
Thanks,
Sam@Samuel-Marchetti Can you try setting MAV_TYPE to 14, then power cycle and try the stabilized flight again?
-
@Samuel-Marchetti Can you try setting MAV_TYPE to 14, then power cycle and try the stabilized flight again?
@Eric-Katzfey Thank you so much this fixed the issue!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login