Stinger VRX not turning on
-
We received our Stinger with VRX in the mail last week. Yesterday, we reviewed all the available YouTube videos and documentation, then set up the unit as instructed. We connected the three antennas and USB-C to HDMI converter, then HDMI into a monitor, but nothing happened. We ensured the 4S batteries were fully charged, double-checked all connections, and tried three different USB-C to HDMI dongles. We tried multiple monitors. In each case, nothing appeared on the screen and no lights showed up on the VRX. Please help.
The VRX SN is: M25000000JUH
-
@Grier Can you post a picture of your setup?
-
-
Any help on this would be greatly appreciated.
-
@Grier Do you have another USB-C to HDMI converter that you could try?
-
Yes, we tried three and nothing works.
-
The three are all different makes/models
-
Could you share some information on the adapters that you have tried? This is the adapter we usually use: https://www.cablematters.com/pc-1368-125-48gbps-usb-c-to-hdmi-21-adapter-supports-8k-60hz-4k-240hz-hdr.aspx.
Could you also share some information about your display? Are you trying to power the display via the VRX?
