Hires IMX214 M0024-2 causing ADB to stop working
-
I was attempting voxl-configure-cams and it failed to detect the IMX214 hires camera. I unplugged the voxl2 and verified the ports that the hires was plugged into. It was on the wrong port, it was on J6L instead of J7U. I reinstalled the hires camera on the correct port. The next time I powered the Voxl2 on, ADB would not work and lsusb shows QUSB_BULK instead of KONA-QRD. I read on a different post that QSUB_BULK is typically an indication of a hardware issue.
Did I fry the IMX214 M0024-2 by putting it on the wrong port? -
I was attempting voxl-configure-cams and it failed to detect the IMX214 hires camera. I unplugged the voxl2 and verified the ports that the hires was plugged into. It was on the wrong port, it was on J6L instead of J7U. I reinstalled the hires camera on the correct port. The next time I powered the Voxl2 on, ADB would not work and lsusb shows QUSB_BULK instead of KONA-QRD. I read on a different post that QSUB_BULK is typically an indication of a hardware issue.
Did I fry the IMX214 M0024-2 by putting it on the wrong port? -
@Jeremy-Frederick If you power the voxl 2 with no cameras attached are you able to ADB on? Or does it still show QUSB_BULK?
-
@tom with no cameras I can ADB on
-
@Jeremy-Frederick Can you post a picture of your camera setup and let us know what camera configuration you're attempting to use?
@Jeremy-Frederick , this can happen if you plug the camera or the camera interposer (or both) in the wrong orientation into VOXL2. please check pin 1 alignment in all camera connections.
-
It ended up being a combination of incorrect ports and pin alignment. The cameras worked great once I got the correct reference frame nailed down.
@Jeremy-Frederick, that is great!
Luckily (or by design
) the camera connector reversal is typically not fatal, but DO NOT push your luck, please . Technically, if damage occurs due to incorrect insertion of the camera connectors, this will void the warranty for the main board.Always verify connector orientation when changing camera configuration.
Alex
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login