ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Voxl2 Spektrum Receiver error

    VOXL 2
    4
    90
    6474
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Eric KatzfeyE
      Eric Katzfey ModalAI Team @Chase Riley
      last edited by

      @Chase-Riley For the DX8 there are some configuration options on the transmitter. There is DSMX versus DSM2. That may need to be changed. Have you tried the different options yet?

      Chase RileyC 1 Reply Last reply Reply Quote 0
      • Chase RileyC
        Chase Riley @Eric Katzfey
        last edited by

        @Eric-Katzfey I have tried all of the options in the DX8. 11, 22 and DSM2, DSMX. They all seemed to produce the same results in the logs.

        1 Reply Last reply Reply Quote 0
        • Chase RileyC
          Chase Riley @Eric Katzfey
          last edited by

          @Eric-Katzfey Here is a voxl-px4 log while testing with a DX6e this morning. I was able to bind and calibrate no problem. I am just not able to control the motors. Flight mode and kill switch seem to be working fine. So seems to have the same behavior as the DX8 with a error in the log for 32 bytes and 0x00.

          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          ERROR [muorb] SLPI: Spektrum RC: Invalid DSM frame. 32 bytes. Protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Armed by external command	
          INFO  [logger] Start file log (type: full)
          INFO  [logger] [logger] /data/px4/log/2024-01-24/19_14_37.ulg	
          INFO  [logger] Opened full log file: /data/px4/log/2024-01-24/19_14_37.ulg
          WARN  [mavlink] Event dropped (297, 65527)
          WARN  [mavlink] Event dropped (297, 65527)
          WARN  [mavlink] Dropped 65230 events (seq=65527)
          WARN  [mavlink] Dropped 65230 events (seq=65527)
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
          INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
          INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
          INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
          INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
          
          Eric KatzfeyE 1 Reply Last reply Reply Quote 0
          • Eric KatzfeyE
            Eric Katzfey ModalAI Team @Chase Riley
            last edited by

            @Chase-Riley Huh, that still doesn't look right. When you calibrate you can move each stick and it shows properly in QGC? And listener input_rc shows the values moving properly when you move the sticks? What is the value of the parameter COM_RC_IN_MODE?

            Chase RileyC 1 Reply Last reply Reply Quote 0
            • Chase RileyC
              Chase Riley @Eric Katzfey
              last edited by

              @Eric-Katzfey yes, each stick moves correctly in QGC. listener input_rc shows all sticks move correctly. I have tested with COM_RC_IN_MODE set to 0 and 2 and both yield the same results.

              Eric KatzfeyE 1 Reply Last reply Reply Quote 0
              • Eric KatzfeyE
                Eric Katzfey ModalAI Team @Chase Riley
                last edited by

                @Chase-Riley And they are mapped correctly such that throttle is on the stick you want? Can you do listener on manual_control_setpoint and see the throttle value move when you move the throttle stick?

                Chase RileyC 1 Reply Last reply Reply Quote 0
                • Chase RileyC
                  Chase Riley @Eric Katzfey
                  last edited by

                  @Eric-Katzfey RC_MAP_THROTTLE is set to Channel 3, RC_MAP_YAW is set to Channel 4, RC_MAP_ROLL is set to Channel 1, and RC_MAP_PITCH is set to Channel 2.

                  Moving the Throttle and Yaw stick while running listener manual_control_setpoint shows Throttle and Yaw changing values as it should. It also shows that Stick movement goes TRUE.

                  Eric KatzfeyE 2 Replies Last reply Reply Quote 0
                  • Eric KatzfeyE
                    Eric Katzfey ModalAI Team @Chase Riley
                    last edited by

                    @Chase-Riley Then at this point I can't think of how the RC could be related to the motors not spinning up. Can you arm, try to throttle up a few times, then disarm and send us the px4 flight log?

                    Chase RileyC 1 Reply Last reply Reply Quote 0
                    • Eric KatzfeyE
                      Eric Katzfey ModalAI Team @Chase Riley
                      last edited by

                      @Chase-Riley And you have tried to throttle up in manual flight mode?

                      1 Reply Last reply Reply Quote 0
                      • Chase RileyC
                        Chase Riley @Eric Katzfey
                        last edited by

                        @Eric-Katzfey I have tried to spin the motors in manual mode as well with no change. I have included a drop box link with the px4 flight log you requested.

                        https://www.dropbox.com/scl/fi/z5jnzbj44lnezjyhuzh8d/DX6e_Throttle_Test_log.ulg?rlkey=csjcwa2eu7n9g20xfah9bz7u3&dl=0

                        Eric KatzfeyE 1 Reply Last reply Reply Quote 0
                        • Eric KatzfeyE
                          Eric Katzfey ModalAI Team @Chase Riley
                          last edited by

                          @Chase-Riley I'm having some others take a look at the log file. I'm kind of stumped at the moment.

                          Chase RileyC 1 Reply Last reply Reply Quote 0
                          • Chase RileyC
                            Chase Riley @Eric Katzfey
                            last edited by

                            @Eric-Katzfey Please let me know what you or your team find. This seems to be the last hurdle to getting me to flight testing. I have a shipping deadline to make on Friday with this system.

                            Eric KatzfeyE Alex KushleyevA 2 Replies Last reply Reply Quote 0
                            • Eric KatzfeyE
                              Eric Katzfey ModalAI Team @Chase Riley
                              last edited by

                              @Chase-Riley Seems like ESC param issue. Alex is going to respond with some suggestions.

                              1 Reply Last reply Reply Quote 0
                              • Alex KushleyevA
                                Alex Kushleyev ModalAI Team @Chase Riley
                                last edited by Alex Kushleyev

                                @Chase-Riley , we have discussed and the data on the PX4 side looks ok so far, which leads me to believe there may be an error in ESC params, specifically the RPM curve calibration pwm_vs_rpm_curve_a0, pwm_vs_rpm_curve_a1, pwm_vs_rpm_curve_a2.

                                Please confirm that you performed the calibration (with propeller mounted on motor!) according to instructions here and updated the results (a0, a1, a2) params in your esc params xml file and sent it to the ESC ?

                                Also double check the min_rpm and max_rpm in your esc params

                                Alex KushleyevA 1 Reply Last reply Reply Quote 0
                                • Alex KushleyevA
                                  Alex Kushleyev ModalAI Team @Alex Kushleyev
                                  last edited by

                                  Additionally, I saw that you use THR_MDL_FAC set to 0.8, which is what we use in our Sentinel drone. However, your propellers, if i am not mistaken, are much larger and this factor may need to be correct. I will double check how to calculate this factor correctly.

                                  Alex KushleyevA Chase RileyC 2 Replies Last reply Reply Quote 0
                                  • Alex KushleyevA
                                    Alex Kushleyev ModalAI Team @Alex Kushleyev
                                    last edited by Alex Kushleyev

                                    Another suggestion: you can test your ESC response with the following command:

                                    https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-esc/-/blob/dev/voxl-esc-tools/calibration.md?ref_type=heads#test-esc-using-rpm-commands (at the very bottom)

                                    (you can adjust your test command according to your motor / prop and min/max rpm, etc)

                                    Chase RileyC 1 Reply Last reply Reply Quote 0
                                    • Chase RileyC
                                      Chase Riley @Alex Kushleyev
                                      last edited by

                                      @Alex-Kushleyev I went and checked my .xml file and verified it was correct and re uploaded it to the ESC just to make sure. I had already run the calibration and updated the A0, A1, and A2.

                                      I did find that my min_rpm and max rpm were different in the xml file than I had them set in px4. That may have been the issue because control seems to be working fine now. Between re flashing the xml and changing the values one or both of the solutions solved the issue. I will contnue testing and report back with any issues. Thanks for jumping in and helping out.

                                      @Eric-Katzfey you said this morning that the DX6e data I sent over did not look correct. Is there something else we want to look into there. As I said before after looking at the logs the DX8 and the DX6e seem to behave the same way.

                                      Eric KatzfeyE 1 Reply Last reply Reply Quote 0
                                      • Chase RileyC
                                        Chase Riley @Alex Kushleyev
                                        last edited by

                                        @Alex-Kushleyev Do you have a rough idea of what this value should be set to? If you need to know my motor and prop combo send me an email. I would rather not disclose on the forums.

                                        Alex KushleyevA 1 Reply Last reply Reply Quote 0
                                        • Alex KushleyevA
                                          Alex Kushleyev ModalAI Team @Chase Riley
                                          last edited by

                                          @Chase-Riley , i am checking. There should be a formula to calculated it.

                                          Alex KushleyevA 1 Reply Last reply Reply Quote 0
                                          • Eric KatzfeyE
                                            Eric Katzfey ModalAI Team @Chase Riley
                                            last edited by

                                            @Chase-Riley Just the protocol byte being different than what we normally see. Not sure why it is doing that.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Powered by NodeBB | Contributors