ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Voxl2 Spektrum Receiver error

    VOXL 2
    4
    90
    6474
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Chase RileyC
      Chase Riley @Eric Katzfey
      last edited by

      @Eric-Katzfey When getting everything tested to go out and fly I started receiving a failsafe for ESC failure. When we were working with this back in SDK 1.0 in this thread. I had the issue of the actuators tab not showing up in QGC. I can now see the actuators tab on SDK 1.1.2 however I can not test the motors and when I try to arm I receive ESC Failure message. I am not sure if this has something to do with the custom deb file like it did when I couldn't see the actuators tab.

      I can upload firmware and params to the ESC fine. Running voxl-esc-scan.py returns no issues. Any thoughts?

      1 Reply Last reply Reply Quote 0
      • Chase RileyC
        Chase Riley @Eric Katzfey
        last edited by Chase Riley

        @Eric-Katzfey I was able to solve the ESC issue. It was not linked to the Spektrum issue. After getting the ESC to function I was not able to control throttle on the air vehicle. I am able to calibrate the RC controller and set flight modes and so on. Everything seems normal until a arm the motors (testing in Stabilize). The motors arm and spin up but I am unable to change the speed on the motors with any input of the controller. I checked the Px4 RC params and all match previously good known params. I have inlcluded a snippet of running voxl-px4 -d with Spektrum sill with -v argument. I noticed there was another error with a different value and was also 32 bytes instead of the 16 bytes we have been seeing.

        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Sending initial CFG_VALSET. Attempt: 3
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [uORB] Advertising remote topic mavlink_log
        INFO  [muorb] SLPI: Armed by external command	
        INFO  [uORB] Advertising remote topic vehicle_command_ack
        INFO  [logger] Start file log (type: full)
        WARN  [uORB] orb_advertise_multi: failed to set queue size
        INFO  [logger] [logger] /data/px4/log/2024-01-23/16_57_27.ulg	
        WARN  [mavlink] Event dropped (7, 65526)
        WARN  [mavlink] Event dropped (7, 65526)
        INFO  [logger] Opened full log file: /data/px4/log/2024-01-23/16_57_27.ulg
        INFO  [muorb] SLPI: Advertising remote topic logger_status
        WARN  [mavlink] Dropped 65519 events (seq=65526)
        WARN  [mavlink] Dropped 65519 events (seq=65526)
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Takeoff detected	
        WARN  [mavlink] Event dropped (65527, 7)
        WARN  [mavlink] Event dropped (65527, 7)
        WARN  [mavlink] Dropped 7 events (seq=7)
        WARN  [mavlink] Dropped 7 events (seq=7)
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: baudrate set to 9600
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Sending initial CFG_VALSET. Attempt: 1
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Sending initial CFG_VALSET. Attempt: 2
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Sending initial CFG_VALSET. Attempt: 3
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: u-blox firmware version: SPG 3.01
        INFO  [muorb] SLPI: u-blox protocol version: 18.00
        INFO  [muorb] SLPI: u-blox module: NEO-M8N-0
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Landing detected	
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [muorb] SLPI: baudrate set to 9600
        INFO  [muorb] SLPI: Sending initial CFG_VALSET. Attempt: 1
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xfe
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        ERROR [muorb] SLPI: Spektrum RC: Invalid DSM frame. 32 bytes. Protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x63 0x00
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
        INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
        INFO  [muorb] SLPI: 0x00 0x02 0x0b 0xf5 0x2e 0xaa 0x13 0xff
        INFO  [muorb] SLPI: Disarmed by landing	
        INFO  [muorb] SLPI: 0x21 0x56 0x36 0xaa 0x54 0x00 0x65 0x00
        INFO  [uORB] Marking DeviceNode(parameter_server_set_value_request) as advertised in process_remote_topic
        INFO  [muorb] SLPI: Marking DeviceNode(parameter_server_set_value_response) as advertised in process_remote_t
        INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x02
        
        Eric KatzfeyE 1 Reply Last reply Reply Quote 0
        • Chase RileyC
          Chase Riley @Eric Katzfey
          last edited by Chase Riley

          @Eric-Katzfey I am also getting my hands on a DX6e for me to test. I should be able to try that in the morning. I still would like to figure out the DX8 as well though since we already have a bunch on hand in our lab.

          Eric KatzfeyE 1 Reply Last reply Reply Quote 0
          • Eric KatzfeyE
            Eric Katzfey ModalAI Team @Chase Riley
            last edited by

            @Chase-Riley Did you analyze the flight log?

            1 Reply Last reply Reply Quote 0
            • Eric KatzfeyE
              Eric Katzfey ModalAI Team @Chase Riley
              last edited by

              @Chase-Riley For the DX8 there are some configuration options on the transmitter. There is DSMX versus DSM2. That may need to be changed. Have you tried the different options yet?

              Chase RileyC 1 Reply Last reply Reply Quote 0
              • Chase RileyC
                Chase Riley @Eric Katzfey
                last edited by

                @Eric-Katzfey I have tried all of the options in the DX8. 11, 22 and DSM2, DSMX. They all seemed to produce the same results in the logs.

                1 Reply Last reply Reply Quote 0
                • Chase RileyC
                  Chase Riley @Eric Katzfey
                  last edited by

                  @Eric-Katzfey Here is a voxl-px4 log while testing with a DX6e this morning. I was able to bind and calibrate no problem. I am just not able to control the motors. Flight mode and kill switch seem to be working fine. So seems to have the same behavior as the DX8 with a error in the log for 32 bytes and 0x00.

                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  ERROR [muorb] SLPI: Spektrum RC: Invalid DSM frame. 32 bytes. Protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf5 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Armed by external command	
                  INFO  [logger] Start file log (type: full)
                  INFO  [logger] [logger] /data/px4/log/2024-01-24/19_14_37.ulg	
                  INFO  [logger] Opened full log file: /data/px4/log/2024-01-24/19_14_37.ulg
                  WARN  [mavlink] Event dropped (297, 65527)
                  WARN  [mavlink] Event dropped (297, 65527)
                  WARN  [mavlink] Dropped 65230 events (seq=65527)
                  WARN  [mavlink] Dropped 65230 events (seq=65527)
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  INFO  [muorb] SLPI: Spektrum RC: DSM message parsed successfully
                  INFO  [muorb] SLPI: Spektrum RC: Publishing input_rc
                  INFO  [muorb] SLPI: 0x00 0x00 0x8c 0x05 0x01 0x56 0x14 0x00
                  INFO  [muorb] SLPI: 0x1b 0xf6 0x2e 0xaa 0x3c 0x00 0x34 0x00
                  INFO  [muorb] SLPI: Spektrum RC: 16 bytes from UART, protocol byte 0x00
                  
                  Eric KatzfeyE 1 Reply Last reply Reply Quote 0
                  • Eric KatzfeyE
                    Eric Katzfey ModalAI Team @Chase Riley
                    last edited by

                    @Chase-Riley Huh, that still doesn't look right. When you calibrate you can move each stick and it shows properly in QGC? And listener input_rc shows the values moving properly when you move the sticks? What is the value of the parameter COM_RC_IN_MODE?

                    Chase RileyC 1 Reply Last reply Reply Quote 0
                    • Chase RileyC
                      Chase Riley @Eric Katzfey
                      last edited by

                      @Eric-Katzfey yes, each stick moves correctly in QGC. listener input_rc shows all sticks move correctly. I have tested with COM_RC_IN_MODE set to 0 and 2 and both yield the same results.

                      Eric KatzfeyE 1 Reply Last reply Reply Quote 0
                      • Eric KatzfeyE
                        Eric Katzfey ModalAI Team @Chase Riley
                        last edited by

                        @Chase-Riley And they are mapped correctly such that throttle is on the stick you want? Can you do listener on manual_control_setpoint and see the throttle value move when you move the throttle stick?

                        Chase RileyC 1 Reply Last reply Reply Quote 0
                        • Chase RileyC
                          Chase Riley @Eric Katzfey
                          last edited by

                          @Eric-Katzfey RC_MAP_THROTTLE is set to Channel 3, RC_MAP_YAW is set to Channel 4, RC_MAP_ROLL is set to Channel 1, and RC_MAP_PITCH is set to Channel 2.

                          Moving the Throttle and Yaw stick while running listener manual_control_setpoint shows Throttle and Yaw changing values as it should. It also shows that Stick movement goes TRUE.

                          Eric KatzfeyE 2 Replies Last reply Reply Quote 0
                          • Eric KatzfeyE
                            Eric Katzfey ModalAI Team @Chase Riley
                            last edited by

                            @Chase-Riley Then at this point I can't think of how the RC could be related to the motors not spinning up. Can you arm, try to throttle up a few times, then disarm and send us the px4 flight log?

                            Chase RileyC 1 Reply Last reply Reply Quote 0
                            • Eric KatzfeyE
                              Eric Katzfey ModalAI Team @Chase Riley
                              last edited by

                              @Chase-Riley And you have tried to throttle up in manual flight mode?

                              1 Reply Last reply Reply Quote 0
                              • Chase RileyC
                                Chase Riley @Eric Katzfey
                                last edited by

                                @Eric-Katzfey I have tried to spin the motors in manual mode as well with no change. I have included a drop box link with the px4 flight log you requested.

                                https://www.dropbox.com/scl/fi/z5jnzbj44lnezjyhuzh8d/DX6e_Throttle_Test_log.ulg?rlkey=csjcwa2eu7n9g20xfah9bz7u3&dl=0

                                Eric KatzfeyE 1 Reply Last reply Reply Quote 0
                                • Eric KatzfeyE
                                  Eric Katzfey ModalAI Team @Chase Riley
                                  last edited by

                                  @Chase-Riley I'm having some others take a look at the log file. I'm kind of stumped at the moment.

                                  Chase RileyC 1 Reply Last reply Reply Quote 0
                                  • Chase RileyC
                                    Chase Riley @Eric Katzfey
                                    last edited by

                                    @Eric-Katzfey Please let me know what you or your team find. This seems to be the last hurdle to getting me to flight testing. I have a shipping deadline to make on Friday with this system.

                                    Eric KatzfeyE Alex KushleyevA 2 Replies Last reply Reply Quote 0
                                    • Eric KatzfeyE
                                      Eric Katzfey ModalAI Team @Chase Riley
                                      last edited by

                                      @Chase-Riley Seems like ESC param issue. Alex is going to respond with some suggestions.

                                      1 Reply Last reply Reply Quote 0
                                      • Alex KushleyevA
                                        Alex Kushleyev ModalAI Team @Chase Riley
                                        last edited by Alex Kushleyev

                                        @Chase-Riley , we have discussed and the data on the PX4 side looks ok so far, which leads me to believe there may be an error in ESC params, specifically the RPM curve calibration pwm_vs_rpm_curve_a0, pwm_vs_rpm_curve_a1, pwm_vs_rpm_curve_a2.

                                        Please confirm that you performed the calibration (with propeller mounted on motor!) according to instructions here and updated the results (a0, a1, a2) params in your esc params xml file and sent it to the ESC ?

                                        Also double check the min_rpm and max_rpm in your esc params

                                        Alex KushleyevA 1 Reply Last reply Reply Quote 0
                                        • Alex KushleyevA
                                          Alex Kushleyev ModalAI Team @Alex Kushleyev
                                          last edited by

                                          Additionally, I saw that you use THR_MDL_FAC set to 0.8, which is what we use in our Sentinel drone. However, your propellers, if i am not mistaken, are much larger and this factor may need to be correct. I will double check how to calculate this factor correctly.

                                          Alex KushleyevA Chase RileyC 2 Replies Last reply Reply Quote 0
                                          • Alex KushleyevA
                                            Alex Kushleyev ModalAI Team @Alex Kushleyev
                                            last edited by Alex Kushleyev

                                            Another suggestion: you can test your ESC response with the following command:

                                            https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-esc/-/blob/dev/voxl-esc-tools/calibration.md?ref_type=heads#test-esc-using-rpm-commands (at the very bottom)

                                            (you can adjust your test command according to your motor / prop and min/max rpm, etc)

                                            Chase RileyC 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Powered by NodeBB | Contributors