ModalAI Forum

@Alex-Kushleyev This was what I got when opening the file in SolidWorks:

I found a symlink mismatch in the file tree... pushing M073 PCB board with M0172 connector.

Anyway, it is solved now:

Thank you.

Regards,
Jacob

Hello,

I need to integrate the M0172 in my CAD design. However, the link to download the model does not correspond to the actual adapter. Can I get the correct one?

Thank you!

Best Regards,
Jacob

@Alex-Kushleyev Ok, I will order it in the future.

Regards,
Jacob

Hello,

I would like to know if I can buy the M0187 lepton + tof Adapter. If not, could you provide insights for a custom carrier board for the lepton?

Thank you in advance!

Regards,
Jacob

@zauberflote1 ok, thank you!

I will try to implement the mask as in VoxlCam.

Regards,
Jacob

@Alex-Kushleyev , thank you for the insights!

I will try the basic version and see if it suits our industrial solution on field.
If it fits I ask for the full version.

Regards,
Jacob

Hello @wilkinsaf,

Do you know where I can find that integration/implementation for color output on the AR 0144?

Thank you!

Regards,
Jacob

Re: open-vins mask file location

Dear All,

Regarding the previous post of @Jeremy-Frederick I'm still being unable to find the Open-VINS mask file location to apply different masks to each camera.

Can you comment on that?

Thank you in advance.

Best Regards,
Jacob

@Alex-Kushleyev ,

Thank you for the clarification!

We will change the service and see if it meets our needs.

Regards,
Jacob

Re: Neopixel GPIO control on VOXL2 SPI port

Hello all,

We have been trying to integrate Neopixel on io_0 and io_3 in PX4 to control with "led_control" and, in case not possible, with voxl-send-neopixel-cmd.
However, with voxl-send-neopixel-cmd, we can't define color, just turn the RGB strip on or change the number of LEDs. When trying to use it on PX4 with "voxl-esc led -l 0x001", it does not run, due to the modal_io_bridge priority.

system-image 1.7.8-M0054-14.1a-perf
hx platform: M0054 1.0.0
voxl-suite:1.3.2

Thank you in advance for any help!

Regards,
Jacob