Re: Neopixel GPIO control on VOXL2 SPI port

Hello all,

We have been trying to integrate Neopixel on io_0 and io_3 in PX4 to control with "led_control" and, in case not possible, with voxl-send-neopixel-cmd.
However, with voxl-send-neopixel-cmd, we can't define color, just turn the RGB strip on or change the number of LEDs. When trying to use it on PX4 with "voxl-esc led -l 0x001", it does not run, due to the modal_io_bridge priority.

system-image 1.7.8-M0054-14.1a-perf
hx platform: M0054 1.0.0
voxl-suite:1.3.2

Thank you in advance for any help!

Regards,
Jacob

Re: Neopixel GPIO control on VOXL2 SPI port

Hello all,

We have been trying to integrate Neopixel on io_0 and io_3 in PX4 to control with "led_control" and, in case not possible, with voxl-send-neopixel-cmd.
However, with voxl-send-neopixel-cmd, we can't define color, just turn the RGB strip on or change the number of LEDs. When trying to use it on PX4 with "voxl-esc led -l 0x001", it does not run, due to the modal_io_bridge priority.

system-image 1.7.8-M0054-14.1a-perf
hx platform: M0054 1.0.0
voxl-suite:1.3.2

Thank you in advance for any help!

Regards,
Jacob