offboard takeoff height problem
-
hi all
we have 5" quad based voxlflight and lidar as an height sensor .
we trying to make simple takeoff to 0.5m height indoor in offboard mode.
we have a Consistent problem, the quad takeoff to 0.5m and after few seconds keep ascending to 2.5m and goes down to 0.5m again .i added here flight log and parameters file .
https://review.px4.io/plot_app?log=2e8f06a0-4185-4393-9eae-1b2a1ab40e85hope you have any ideas
thanks in advance ,
ben -
Hi Ben, we do not have experience integrating a distance sensor for altitude with PX4. Flight Core uses a nearly mainline version of PX4 and should behave as any PX4 system would with an altimeter. PX4 has that feature documented here, that might be a good place to start.
-
Were you able to solve it. It seems that it always takeoffs to the default height 2.5, seems to be something in px4.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login