Edit the follow-tag code for seeker drone
-
Hello all,
I want to edit the source code for the offboard mode (follow_tag). Can you please tell me where can I fine it inside the Voxl? and after editing how should I build it to be able to make it work?
I want to change the z distance between tag and the drone from 1.5m which is right now, to 0.3m.
Thank you,
-
Hello all,
I want to edit the source code for the offboard mode (follow_tag). Can you please tell me where can I fine it inside the Voxl? and after editing how should I build it to be able to make it work?
I want to change the z distance between tag and the drone from 1.5m which is right now, to 0.3m.
Thank you,
@Pooyan Here is a link to the code: https://gitlab.com/voxl-public/voxl-sdk/services/voxl-vision-hub/-/blob/dev/src/offboard_follow_tag.c?ref_type=heads#L171. Build instructions are in the README file.
-
@Pooyan Here is a link to the code: https://gitlab.com/voxl-public/voxl-sdk/services/voxl-vision-hub/-/blob/dev/src/offboard_follow_tag.c?ref_type=heads#L171. Build instructions are in the README file.
@Eric-Katzfey I got it, thank you so much.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login