Battery Charger for Starling 2 Max
-
HI Team,
I have purchased the recommended charger for the Starling 2 max -> https://www.amazon.com/ISDT-Q6-Nano-Charger-Discharger/dp/B09VRVPHW8/, and when I try to change my battery, it shows the operation is not supported. I am attaching the images for the reference. can you please help me with this issue
The above are my connections.I tried to start the charge task with the below settings
But I am getting this issue
-
@vamsi I highly recommend reading the user manual for the battery charger: https://www.isdt.co/down/pdf/Q6nano_EN.pdf
You should only be charging one battery at a time, what you're trying to do is not possible.
The XT30 connector needs to be plugged in to the "Battery" connector on the charger with only a single 2s battery connected to the balance lead input. You'll also want to configure the settings accordingly (2s not 4s)
-
@vamsi this is EXTREMELY dangerous please do not do this - you will without a doubt either overcharge or lose a cell if you charge like this - and will without a doubt lead to a very large fire. This charger does NOT support two battery charging.
-
@tom Thank you for the response I now know what the issue is I will just connect a single battery, use 2s in the settings, and use an XT30 to XT60 converter to connect my XT30 to the "Battery" on the charger.
-
@Zachary-Lowell-0 Thank you for letting me know. this is my first time working with a multi-cell battery and a smart charger. I will be careful not to connect multiple batteries at the same time.
